Goffeu SPQ-12-1 12 V 1 A 12 W 5.5 x 2.1 mm power adapter
A 12 V 1 A 12 W AC-to-DC supply with a 5.5 mm x 2.1 mm plug for security cameras, speakers, routers and other 12 V devices drawing up to 1 A
- Type12 V
- Specifications12 watts, 12 volts, 1 amps, 240 volts, USB Type A, type_a_2p
- Connector AUSB Type A
- Connector BUSB Type A
- Cable Jakcet TypePlastic
- Connector StyleUSB Type A
- Powers 12 V devices drawing up to 1 A with 12 W output
- Accepts 100-240 V AC input for worldwide mains compatibility
- Fitted with 5.5 mm x 2.1 mm barrel plug for secure connection
- Includes over-current, over-voltage, overload and short-circuit protection for safe operation
- Compact 4.191 cm x 6.604 cm x 9.1948 cm housing fits tight spaces
Goffeu SPQ-12-1 12 V 1 A power adapter
This Goffeu SPQ-12-1 adapter delivers a regulated 12 V DC output at up to 1 A for devices that require exactly 12 watts. It suits owners of security cameras, Bluetooth speakers, GPS units, routers or similar 12 V equipment that draws between 0.1 A and 1 A. The unit is new and carries RoHS and FCC certification. It replaces a lost or damaged original supply for compatible hardware.
5.5 x 2.1 mm barrel plug with 100-240 V AC input
The cord terminates in a 5.5 mm by 2.1 mm centre-positive barrel connector that fits the target device directly. Input accepts 100 V to 240 V AC at 50 Hz or 60 Hz, so the adapter works on mains supplies worldwide without a separate voltage selector. Built-in over-current, over-voltage, overload and short-circuit protection guards the connected equipment. The compact black enclosure measures 4.191 cm by 6.604 cm by 9.1948 cm and includes a 10000+ bend-rated cable.
Replaces any 12 V 1 A supply
This unit is a direct swap for an existing 12 V 1 A adapter that uses a 5.5 x 2.1 mm plug and whose device draws no more than 1 A. The jump is worth it when the original supply has failed, lacks safety certifications or shows cable wear. It cannot serve devices needing more than 12 W, a different voltage, a larger current or a different connector diameter.
Highlights
- Powers 12 V devices drawing up to 1 A with 12 W output
- Accepts 100-240 V AC input for worldwide mains compatibility
- Fitted with 5.5 mm x 2.1 mm barrel plug for secure connection
- Includes over-current, over-voltage, overload and short-circuit protection for safe operation
- Compact 4.191 cm x 6.604 cm x 9.1948 cm housing fits tight spaces
Specifications
| Brand | Goffeu |
|---|---|
| Part Number | SPQ-12-1 |
| Type | 12 V |
| Specifications | 12 watts, 12 volts, 1 amps, 240 volts, USB Type A, type_a_2pin_na, 0, 12V1A |
| Connector A | USB Type A |
| Connector B | USB Type A |
| Cable Jakcet Type | Plastic |
| Connector Style | USB Type A |
| Apple Compatible | USB Type A |
| Features | 12V1A, USB Type A, Corded Electric, 0, AC, 12 watts |
| Dimensions | 4.191 cm x 6.604 cm x 9.1948 cm |
| Package Quantity | 1 |
| Package Contents | 1 |
| Disclaimer | not_applicable |
Questions about this item
At what load does the 12 W limit engage during continuous operation?
The adapter is rated for a maximum of 12 W at 12 V 1 A; sustained loads above 1 A will trigger the overload protection.
How warm does the SPQ-12-1 get and does it make any noise when running 24/7?
It is a compact switching supply with no fan; typical surface temperature stays warm but within the flame-retardant BI rating, and operation is silent.
What connector must the target device already provide for this adapter to fit?
The device needs a 5.5 mm x 2.1 mm DC barrel jack; the adapter ships with that plug pre-wired.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



