We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red SATA/IDE to USB 3.0 adapter kit with 1.8 in cable and power supply

GODO GD009 SATA/IDE to USB 3.0 Adapter Kit Red 1.8 in

SKU CH-V4HC-S753T

Connects 2.5/3.5 inch SATA and IDE drives plus 5.25 optical drives to USB 3.0 at 5 Gbps with 12 V power included

  • ColorRed
  • Length< 1"
  • Cable Length1.8 in.
  • Connector Number1
  • Specifications5 gigabits_per_second, usb3.0, usb, usb1.1, ide, 3.5 inches,
  • Refresh Rate5 gigabits_per_second
  • Connect 2.5", 3.5" and 5.25" drives simultaneously
  • Transfer data at up to 5 Gbps via USB 3.0
  • Works with IDE 39-pin and 43-pin connectors
  • Plug-and-play on Windows, Mac and Linux
  • Includes 12 V 2 A power adapter for stable operation

Adapter kit for SATA and IDE drives

The GODO GD009 connects 2.5-inch or 3.5-inch SATA hard drives, SSDs and 5.25-inch optical drives plus legacy 39-pin and 43-pin IDE devices to a USB 3.0 host. A 12 V 2 A power adapter and 4-pin power cord supply the drives, while the 1.8-inch cable keeps the link short. Driver-free operation works with Windows XP through 10, Mac OS and Linux.

Suits mixed-drive workflows

Technicians who need simultaneous access to three drives — for example two IDE disks and one SATA SSD — can copy data between them without interference. The adapter does not support NVMe or M.2 drives, so builders moving only modern solid-state storage should choose a different interface.

USB 3.0 at 5 Gbps decides fit

The single specification that determines suitability is the 5 Gbps USB 3.0 link, backward compatible with USB 2.0 at 480 Mbps and USB 1.1 at 12 Mbps. If the target workflow requires higher sustained throughput than this ceiling, the adapter will be the bottleneck.

Highlights

  • Connect 2.5", 3.5" and 5.25" drives simultaneously
  • Transfer data at up to 5 Gbps via USB 3.0
  • Works with IDE 39-pin and 43-pin connectors
  • Plug-and-play on Windows, Mac and Linux
  • Includes 12 V 2 A power adapter for stable operation

Specifications

ModelGD009
ColorRed
Length< 1"
Cable Length1.8 in.
Connector Number1
Specifications5 gigabits_per_second, usb3.0, usb, usb1.1, ide, 3.5 inches, Plastic, 1
Refresh Rate5 gigabits_per_second
Featuresusb3.0, usb, usb1.1, ide, 5 gigabits_per_second
Windows VistaCertified for Windows Vista

Questions about this item

Which drive connectors does the GD009 adapter provide?

The kit includes one SATA III connector plus two IDE connectors — a 39-pin and a 43-pin — for 2.5 and 3.5 inch IDE hard drives, SATA hard drives and SSDs, and 5.25 inch optical drives.

How is the adapter powered and what common step is missed?

A 12 V 2 A DC power adapter and a 4-pin power cord are supplied; the step often missed is setting the IDE jumper to master or slave so the drive is recognised.

What ongoing upkeep does the adapter require?

No scheduled maintenance is needed; only the external 12 V 2 A power adapter or the USB 3.0 cable would need replacement if they fail.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.