GODIAG
GODIAG GT110 VW Skoda Seat CAN-Bus UDS 4th Gen IMMO Test Platform Cable POGO PIN
CAN-Bus UDS 4th generation IMMO test platform with POGO PIN for offline data reading and writing on VW, Skoda and Seat vehicles
- FeaturesGODIAG GT112 K-Line FOR VW Audi Skoda Seat 2nd & 3rd Generat
- TypeCode Scanners & Accessories
- Offline POGO PIN read and write for VW Skoda Seat UDS IMMO
- Works with VVDI2, Key Tool Plus, X300 DP Plus and other programmers
- Built-in voltage and current display with power switch
- Simulated ignition switch and buzzer confirm start and shut-down
- CR2032 remote key battery detection and IMMO sync test included
VW Skoda Seat CAN-Bus UDS IMMO Test Platform
The GODIAG GT110 is a dedicated test platform cable for Volkswagen, Skoda and Seat vehicles that use fourth-generation CAN-Bus UDS immobiliser systems. It enables offline reading and writing of POGO PIN data for dashboard key programming and immobiliser diagnostics. The unit includes a power switch, simulated ignition switch, voltage and current display, and a buzzer for ignition status alerts.
Automotive locksmiths
Technicians who need to perform key matching, mileage correction, IMMO data backup or emergency start detection on supported VW Group models will find the required POGO PIN interface and multi-function test points. Shops that only service second- or third-generation K-Line or CAN-Bus 3.0/3.5 immobilisers, or brands outside the VW Group, should select a different platform such as the GT111 or GT112.
POGO PIN offline read/write for 4th Gen UDS IMMO
The defining capability is the ability to read and write POGO PIN data directly from the immobiliser module without an on-line connection, which determines whether the tool can handle the target dashboard or key programming job.
Highlights
- Offline POGO PIN read and write for VW Skoda Seat UDS IMMO
- Works with VVDI2, Key Tool Plus, X300 DP Plus and other programmers
- Built-in voltage and current display with power switch
- Simulated ignition switch and buzzer confirm start and shut-down
- CR2032 remote key battery detection and IMMO sync test included
Specifications
| Brand | GODIAG |
|---|---|
| Features | GODIAG GT112 K-Line FOR VW Audi Skoda Seat 2nd & 3rd Generation Dashboard IMMO Key Matching Test Platform Cable GODIAG GT111 FOR VW Audi Skoda Seat CAN-Bus 3rd & 3.5th Generation Dashboard IMMO Key Matching Test Platform Cable with POGO PIN to Read & Write Data GODIAG GT110 FOR VW Audi Skoda Seat CAN-Bus UDS 4th Generation IMMO System Test Platform Cable with POGO PIN to Read & Write POGO PIN Data |
| Type | Code Scanners & Accessories |
Questions about this item
Will the GT110 work with my older VAS5054A diagnostic interface?
Yes, the GT110 is compatible with the VAS5054A and other listed tools such as VAS6154, HEX V2 and VVDI2 for 4th generation UDS IMMO tasks.
How can I confirm the GT110 is communicating correctly after connecting it?
The unit shows working voltage and current on its display, uses a buzzer to signal ignition on and off, and has a CANH UDS communication indicator LED.
Does the package include a CR2032 battery for the remote key detection function?
The platform has a CR2032 detection slot for testing remote key batteries; a battery is not supplied and must be purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



