We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 19-inch 2U rack-mount server chassis, 300mm deep, front panel with two USB 3.0 ports and indicator LEDs

Gintol

Gintol K230F 2U 300mm depth server chassis

SKU CH-96E1-WD9KM MPN K230F

A 19-inch 2U rack-mount server case with 300 mm depth, dual 80 mm fans, four low-profile PCIe slots, and front 2 USB 3.0 ports

  • Fits 19-inch racks with only 300mm depth
  • Supports 9.6-inch square motherboards up to 245mm
  • Holds three 2.5-inch plus one 3.5-inch drives or four 2.5-inch drives
  • Front panel provides two USB 3.0 ports with power and reset controls
  • Includes two 8020 fans for 80mm active cooling

Compact 2U server chassis for short-depth racks

The Gintol K230F is a 19 inch rack-mount enclosure that occupies 2U of height and extends only 300mm front to rear. It accepts motherboards up to 245mm square and ships as a bare shell without additional accessories. Two 80mm fans are pre-installed for airflow. Builders needing a shallow industrial or monitoring platform will find the dimensions a direct fit.

Thermal behaviour under sustained load

A pair of 8020 fans moves air through the 89mm tall interior, targeting the CPU zone and the four half-height PCIe slots. The short 300mm depth limits component length but keeps the airflow path tight, helping the fans maintain pressure during continuous operation. Drive bays sit beside the fan wall so spinning disks receive direct cooling without extra ducting.

Compatibility checks before ordering

Verify your motherboard measures no more than 245mm by 245mm and uses an ATX power supply. Confirm that half-height PCIe cards satisfy your expansion needs because full-height cards will not fit. Ensure the 2.5 and 3.5 inch drive mix matches the three-plus-one or four-bay layout. Rack depth must accommodate the 300mm chassis plus cable clearance at the rear.

Highlights

  • Fits 19-inch racks with only 300mm depth
  • Supports 9.6-inch square motherboards up to 245mm
  • Holds three 2.5-inch plus one 3.5-inch drives or four 2.5-inch drives
  • Front panel provides two USB 3.0 ports with power and reset controls
  • Includes two 8020 fans for 80mm active cooling

Specifications

No published specifications for this item yet.

Questions about this item

How loud are the two 8020 fans when the chassis runs 24/7?

The chassis ships with two 80 mm fans that are designed for quiet operation in a 2U rack space.

What motherboard and power supply must I already have to use this case?

It accepts motherboards up to 245 × 245 mm and a standard ATX power supply.

Will my full-height PCIe cards fit in the four half-height slots?

The chassis provides four half-height expansion slots, so only low-profile cards can be installed.

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.