GGIPOWY 18AWG DC 5.5mm x 2.5mm Power Splitter Cord 3-Pack
Three 18AWG splitter cables divide one 5.5mm × 2.5mm DC input into two male outputs for powering CCTV cameras, LED strips, routers and other 12V or 24V devices
- TypeBlack 3pcs
- ColorBlack
- Connector DetailDC to Male-to-Female
- Terminal GenderMale to Female
- SpecificationsRouter, Printer, Black 3pcs, 0.2 pounds
- ShieldingBlack 3pcs
- Powers two devices from one adapter with 1-to-2 DC splitter design
- Carries up to 10A total load across both outputs for safe operation
- Works with 12V and 24V DC equipment including cameras and LED strips
- Copper conductor with PVC insulation ensures reliable conductivity for low-voltage gear
- Three cables in the pack let you split power at multiple locations
Three-Pack 18AWG Power Splitter
This three-pack provides three individual 18AWG DC power splitter cables. Each cable splits a single 5.5mm x 2.5mm female barrel jack into two male plugs. The set is intended for installers and hobbyists who need to power two low-voltage devices from one adapter without soldering.
Copper Conductors and PVC Insulation
The cables use copper nickel-plated conductors with PVC insulation and a pure copper core. The overall diameter is about 5mm with a wire cross-section of roughly 0.75 square millimetres. This construction supports a maximum of 10A per single output and 10A total load, reducing overload risk when the supply is adequate.
12V-24V Adaptive Voltage Distribution
The splitter handles adaptive 12V to 24V input, making it suitable for CCTV cameras, LED strips, routers, printers, monitors, laptops, DVRs and similar gear. The 5.5mm x 2.5mm barrel connectors plug directly into compatible devices, keeping wiring tidy in home or office installations.
Highlights
- Powers two devices from one adapter with 1-to-2 DC splitter design
- Carries up to 10A total load across both outputs for safe operation
- Works with 12V and 24V DC equipment including cameras and LED strips
- Copper conductor with PVC insulation ensures reliable conductivity for low-voltage gear
- Three cables in the pack let you split power at multiple locations
Specifications
| Brand | GGIPOWY |
|---|---|
| Type | Black 3pcs |
| Color | Black |
| Connector Detail | DC to Male-to-Female |
| Terminal Gender | Male to Female |
| Specifications | Router, Printer, Black 3pcs, 0.2 pounds |
| Shielding | Black 3pcs |
| Conductor | Copper Conductor |
| Construction | DC5.5mm×2.5mm |
| Features | Router, Printer, Black 3pcs |
| Disclaimer | not_applicable |
Questions about this item
Will the copper conductors on these 18AWG splitter cables need replacement over time?
The copper nickel-plated conductors with PVC insulation are built for long-term use; no periodic replacement is required under normal indoor conditions.
What is the first limit reached when running two devices continuously on one 10A splitter?
The combined load must stay at or below 10A total; exceeding that shared limit is the first constraint under sustained operation.
How much heat or noise do the 5.5mm connectors produce during all-day use?
The passive copper-core cables generate no audible noise and only minimal warmth at the connectors when operated within the rated 10A total.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



