We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three white 120mm case fans with RGB lighting and transparent blades, shown in a 3-pack arrangement

Geometric Future

Geometric Future Squama 2501 White 120mm 3-pack case fan

SKU CH-EBWF-0X7M3

Three white 120 mm fans deliver up to 80.81 CFM at 2.78 mm H₂O with 800–2000 RPM PWM control and addressable RGB sync

  • TypeCase Fan Accessory
  • ColorWhite
  • LEDRGB
  • High airflow with 80.81 CFM and 2.78 mm H₂O pressure
  • PWM control from 800 to 2000 rpm balances performance and quietness
  • Addressable RGB syncs with 5 V 3-pin motherboard headers
  • Included controller adds 7 lighting modes and 8 static colours
  • Anti-vibration rubber pads reduce noise and prevent scratches

Three-pack white 120 mm RGB PWM fans

This set contains three 120 mm case fans in a white finish with addressable RGB lighting. Each fan uses a 4-pin PWM connector for speed control and a 5 V 3-pin ARGB header for motherboard synchronisation. A dedicated controller is included for systems without a compatible 5 V header. The pack targets builders who want coordinated lighting and airflow from a single purchase.

Replaces single fans or mixed-kit lighting

Swapping individual fans of varying speed curves and LED types for this matched trio removes colour inconsistency and uneven airflow. The jump is worthwhile when a build needs uniform 5 V ARGB synchronisation across all intake or exhaust positions and the motherboard offers only one 5 V 3-pin header. Builders who need more than three fans or a different frame size will need additional kits.

Sustained airflow at 80.81 CFM and 2.78 mm H₂O

Under continuous load the fans operate between 800 and 2000 rpm, delivering up to 80.81 CFM of airflow with 2.78 mm H₂O static pressure. The Squama particle frame structure and revised curve blades are designed to reduce turbulent flow noise while maintaining pressure efficiency. Anti-vibration rubber pads further limit resonance during prolonged high-speed operation.

Highlights

  • High airflow with 80.81 CFM and 2.78 mm H₂O pressure
  • PWM control from 800 to 2000 rpm balances performance and quietness
  • Addressable RGB syncs with 5 V 3-pin motherboard headers
  • Included controller adds 7 lighting modes and 8 static colours
  • Anti-vibration rubber pads reduce noise and prevent scratches

Specifications

BrandGeometric Future
TypeCase Fan Accessory
ColorWhite
LEDRGB

Questions about this item

Will the 120mm frames and anti-vibration pads fit standard case mounting points?

Yes, the 120mm dimensions match standard case fan mounts and the included anti-vibration rubber pads align with the screw holes to prevent vibration transfer.

How do I connect the 4-pin PWM and 5V 3-pin ARGB cables to the motherboard?

Plug the 4-pin PWM connector into a motherboard fan header for speed control between 800 and 2000 rpm, and the 5V 3-pin ARGB lead into a 5V addressable RGB header; use the supplied controller if your board lacks a 5V header.

When should I clean the Squama particle frame and blades to maintain 80.81 CFM airflow?

Clean the frame and revised curve blades with compressed air every six to twelve months, or when dust buildup is visible, to preserve the 2.78 mm H₂O static pressure performance.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.