We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two soft grey thermal pads 90 by 50 by 2.0mm

GELID SOLUTIONS

GELID SOLUTIONS GP-Ultimate 15W Thermal Pad 90x50x2.0mm 2pcs

SKU CH-EWJK-6Y97Z

Two 90x50mm thermal pads with 15W/mK conductivity fill gaps on GPUs, motherboards and consoles while remaining non-conductive and non-curing

  • First-class heat transfer with 15W/mK thermal conductivity
  • Safe for sensitive electronics thanks to non-electrically conductive material
  • Stable performance across extreme temperatures from -60°C to 220°C
  • Ready to use on large surfaces with 90x50mm pad dimensions
  • Reliable long-term operation with non-curing, non-corrosive composition

High-conductivity thermal pad for dense PCBs

The GP-Ultimate is a 15W/mK thermal interface pad sized at 90 by 50 millimetres and 2.0 millimetres thick, supplied as a two-piece pack. It targets builders and technicians who need reliable heat transfer across uneven component heights on graphics cards, motherboards and other dense assemblies.

Replaces lower-conductivity pads

The jump is worth it when stock pads of 5W/mK or 8W/mK leave hotspots on MOSFETs, chipsets or memory ICs that sit at different heights from the main die. The soft 2.0mm thickness conforms without excessive pressure, while the non-curing, non-corrosive compound avoids pump-out and electrical shorts over the full -60°C to 220°C operating range.

Fits large GPU VRM arrays.

Each 90x50mm sheet covers broad PCB zones in a single piece, reducing seams that can impede flow. The material is electrically insulating, so it can bridge exposed solder joints without risk. Thinner 0.5, 1.0 and 1.5mm variants exist for tighter gaps, while a 3.0mm option serves taller stacks; choose the thickness that matches your specific stack height.

Highlights

  • First-class heat transfer with 15W/mK thermal conductivity
  • Safe for sensitive electronics thanks to non-electrically conductive material
  • Stable performance across extreme temperatures from -60°C to 220°C
  • Ready to use on large surfaces with 90x50mm pad dimensions
  • Reliable long-term operation with non-curing, non-corrosive composition

Specifications

No published specifications for this item yet.

Questions about this item

Will the 90x50mm pad cover my GPU's VRM area without trimming?

Each pad measures 90x50mm and 2.0mm thick; you can cut it to match the exact VRM layout on your graphics card.

Do I need to apply thermal paste before placing the GP-Ultimate pad on the chip?

No paste is required — just remove the protective film, position the non-electrically conductive pad on the component, and press the heatsink down firmly.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.