We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two thin grey thermal pads 90 by 50 by 0.5 mm

GELID SOLUTIONS

GELID SOLUTIONS GP-Ultimate 15W Thermal Pad 90x50x0.5mm 2pcs

SKU CH-00WA-5MHPJ

High-conductivity 15W/mK thermal pad fills gaps on GPU, motherboard and console components, non-conductive and stable from -60°C to 220°C

  • 15 W/mK conductivity transfers heat efficiently from hot components
  • Non-electrically conductive pad prevents short circuits on dense PCBs
  • Soft 0.5 mm thickness conforms to uneven surfaces and height differences
  • 90 × 50 mm sheets cover large GPU, motherboard or add-on card areas
  • Stable from –60 °C to 220 °C for reliable long-term operation

High-conductivity thermal pad

The GP-Ultimate thermal pad delivers 15W/mK conductivity for transferring heat from hot components to heatsinks. It suits builders fitting cooling to GPU memory, VRM zones or console boards where gaps vary. The material is non-electrically conductive, non-corrosive and non-toxic. Two pads measuring 90x50mm are included in the pack.

Thickness and operating limits

This variant is .5mm thick; the range also offers 1.0, 1.5, 2.0 and 3.0mm options for larger gaps. The pad remains stable from -60°C to 220°C without hardening or curing. It will not bridge gaps thicker than the chosen pad height. Builders needing to fill spaces beyond 3.0mm must use a different solution.

15W/mK conductivity rating

The single figure that decides suitability is the 15W/mK thermal conductivity. It determines whether the pad can move enough heat for the target component under load. If the design requires higher conductivity, this pad will not meet the thermal budget. Choose based on that rating and the required thickness.

Highlights

  • 15 W/mK conductivity transfers heat efficiently from hot components
  • Non-electrically conductive pad prevents short circuits on dense PCBs
  • Soft 0.5 mm thickness conforms to uneven surfaces and height differences
  • 90 × 50 mm sheets cover large GPU, motherboard or add-on card areas
  • Stable from –60 °C to 220 °C for reliable long-term operation

Specifications

No published specifications for this item yet.

Questions about this item

Which thickness should I pick for my GPU or motherboard?

The pad comes in .5, 1.0, 1.5, 2.0 and 3.0mm; measure the gap between the component and heatsink and choose the closest match.

What does the 15W/mK rating mean for my graphics card?

It indicates very high thermal conductivity so heat moves quickly from hot chips to the cooler, lowering temperatures under load.

Is the pad electrically conductive or does it cure over time?

It is non-electrically conductive, non-corrosive, non-curing and non-toxic, safe for direct contact with exposed circuits.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.