We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two soft grey thermal pads 120 by 20 by 2.5 mm

GELID SOLUTIONS

GELID SOLUTIONS GP-Extreme Thermal Pad 120x20x2.5mm 2pcs

SKU CH-19FH-PD7CS

Thermal pad measuring 120 by 20 by 2.5 mm with 12 W/m·K conductivity, non-conductive and non-curing, supplied as a pair for RAM, VRM and M.2 SSD cooling

  • Excellent heat conduction with 12 W/mK thermal conductivity
  • Non-electrically conductive for safe use on sensitive components
  • Non-corrosive, non-curing and non-toxic material composition
  • Easy application on uneven surfaces and height differences
  • Fits RAM, VRM and M.2 SSD with 120×20×2.5 mm dimensions

High-conductivity thermal pad for uneven surfaces

The GELID SOLUTIONS GP-Extreme thermal pad measures 120x20x2.5 mm and delivers 12 W/mK thermal conductivity. It is designed to bridge height differences on PCBs such as memory ICs, MOSFETs and micro-controllers. The material is non-electrically conductive, non-corrosive, non-curing and non-toxic. Two pads are included for multiple applications.

Replaces standard pads when gaps exceed basic

Standard 5 W/mK pads often leave air pockets on uneven components like VRMs or M.2 type SSDs. The GP-Extreme's higher conductivity and soft 2.5 mm profile fill those spaces more completely. The upgrade is worth it when stock pads cannot maintain contact across stepped PCB layouts. It also suits VGA cards, laptops and gaming consoles with large, irregular surfaces.

Suits builders addressing VRM, RAM or M.2 cooling

Enthusiasts fitting aftermarket heatsinks to graphics cards or motherboard VRM zones will benefit from the conformable 120x20 mm size. Laptop and console modders working with dense SMD layouts also gain reliable contact. Buyers needing electrically conductive interface material or adhesive-backed pads should look elsewhere. Those requiring thinner profiles for tight clearances may need a different specification.

Highlights

  • Excellent heat conduction with 12 W/mK thermal conductivity
  • Non-electrically conductive for safe use on sensitive components
  • Non-corrosive, non-curing and non-toxic material composition
  • Easy application on uneven surfaces and height differences
  • Fits RAM, VRM and M.2 SSD with 120×20×2.5 mm dimensions

Specifications

No published specifications for this item yet.

Questions about this item

Will the 120 mm by 20 mm pad fit my GPU VRM area?

Each pad measures 120 mm long and 20 mm wide, so it covers large rectangular VRM zones on graphics cards and can be trimmed for smaller sections.

How do I apply the 2.5 mm thick pad without trapping air?

Remove the protective film, align the pad over the MOSFETs or memory chips, press evenly from the centre outward, then mount the heatsink — the soft material conforms to uneven surfaces.

When should I replace the thermal pads on my memory modules?

Replace them whenever you disassemble the cooler, if the pad has dried out, torn, or no longer springs back, typically after several years of thermal cycling.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.