We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular grey thermal pad 120 by 20 millimetres half millimetre thick

GELID SOLUTIONS

GELID SOLUTIONS GP-Extreme thermal pad 120 x 20mm 0.5mm

SKU CH-AYD3-R9K6T

A soft 0.5 mm thermal pad measuring 120 by 20 mm that fills uneven gaps on memory, VRM and M.2 SSD components with high conductivity and no electrical risk

  • Excellent heat transfer with 12 W/mK conductivity
  • Safe for electronics thanks to non-conductive design
  • No degradation over time with non-curing formula
  • Simple installation on large 120×20 mm surfaces
  • Ideal for VRM, memory and M.2 SSD cooling

GP-Extreme thermal pad for dense PCBs

This GP-Extreme thermal pad measures 120 by 20 mm and is 0.5 mm thick. It is made for filling gaps on uneven surfaces such as memory ICs, MOSFETs and other SMD components found on graphics cards, laptops and gaming consoles.

Builders with height differences on boards

The soft material conforms to micro-controller units, analog ICs and voltage-regulator modules where flat paste cannot reach. It is not suited for users who need a liquid compound for direct die contact or for those who require a thicker pad for larger component stacks.

Handles 12 W across the full sheet

The pad is rated for 12 W of heat transfer over its 120×20 mm area, giving headroom for typical VRM and M.2 SSD cooling. It will run out of capacity when multiple high-power components share the same pad or when the thermal load exceeds the rated wattage.

Highlights

  • Excellent heat transfer with 12 W/mK conductivity
  • Safe for electronics thanks to non-conductive design
  • No degradation over time with non-curing formula
  • Simple installation on large 120×20 mm surfaces
  • Ideal for VRM, memory and M.2 SSD cooling

Specifications

No published specifications for this item yet.

Questions about this item

What size heatsink or component surface does the 120×20 mm pad cover?

The pad measures 120 mm by 20 mm and 0.5 mm thick, so it fits large PCB areas on graphics cards, laptops or consoles where a single piece can span multiple chips.

Will the GP-Extreme pad short exposed pins on an older GPU or motherboard?

No — the material is non-electrically conductive, so it will not bridge contacts on legacy VRM or memory components you keep in the system.

How can I confirm the pad is making proper contact after installation?

Press the heatsink down evenly; the soft 0.5 mm layer compresses to fill gaps, and you should see a uniform imprint across the 120×20 mm surface when the cooler is removed.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.