GELID SOLUTIONS
GELID SOLUTIONS GP-Extreme 12W Thermal Pad 120x20x1.5mm 2pcs
High-conductivity 12 W/mK thermal pad in 120×20×1.5 mm sheets, non-conductive and easy to cut for GPUs, memory and small PCBs
- 12 W/mK thermal conductivity moves heat efficiently
- 120 x 20 x 1.5 mm pad fits many component gaps
- Non-conductive material prevents electrical short circuits
- Flexible sheet cuts easily for precise placement
- Two pads included for multiple installations
GP-Extreme 12W thermal pad 120x20x1.5mm 2pcs
The Gelid Solutions GP-Extreme is a premium thermal pad rated at 12W/mK conductivity. It is designed for CPUs, GPUs, memory ICs and other heat-sensitive SMD components. The non-conductive, non-corrosive material eliminates short-circuit risk. Two pads are included in the pack.
Easy-to-cut 120x20mm format
Each pad measures 120 by 20 millimetres and can be trimmed for a precise fit on various PCB surfaces. The compound remains non-hardening and non-toxic over time. This ensures consistent contact pressure and safe long-term operation. No electrical conductivity means safer handling around exposed circuitry.
Suits builders needing 1.5mm gap fill on compact
The 1.5mm thickness targets specific gaps on graphics cards, laptops and consoles. Builders requiring 0.5mm, 1.0mm, 2.0mm or 3.0mm thicknesses should select a different variant. Users preferring liquid metal or standard grease for direct die contact will want alternative products.
Highlights
- 12 W/mK thermal conductivity moves heat efficiently
- 120 x 20 x 1.5 mm pad fits many component gaps
- Non-conductive material prevents electrical short circuits
- Flexible sheet cuts easily for precise placement
- Two pads included for multiple installations
Specifications
No published specifications for this item yet.
Questions about this item
Does the 12 W/mK thermal pad need to be replaced after a certain period?
The pad is non-hardening and maintains performance over extended periods, so routine replacement is not required unless it is physically damaged or removed.
What thickness limit applies when fitting the 1.5 mm pad between a GPU die and its cooler?
The 1.5 mm thickness is the limiting dimension; the gap must match this value or the pad will not make full contact.
How much heat does the 12 W/mK pad add to the system when running continuously?
The pad itself generates no heat; it only transfers heat from the component to the cooler without electrical conductivity.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
