GELID SOLUTIONS
GELID SOLUTIONS GP-Extreme 12W Thermal Pad 120x20x1.0mm 2pcs
High-performance 12 W/mK thermal pad, 120×20×1.0 mm, non-conductive, non-corrosive, easy to cut, two pieces
- 12 W/mK conductivity moves heat fast
- 120 × 20 mm sheet fits many layouts
- Non-conductive, non-corrosive, non-toxic safety
- 0 mm thickness bridges component gaps cleanly
- Supplied as a pair for dual installations
High-conductivity thermal pad
The Gelid Solutions GP-Extreme is a 12 W/mK thermal pad sized at 120 mm by 20 mm with a 1.0 mm thickness. Two pads are supplied for use on CPUs, GPUs, memory ICs and other SMD components. The material is non-electrically conductive, non-corrosive, non-hardening and non-toxic.
Practical limits of the pad format
The 1.0 mm thickness suits gaps that match this exact dimension; thinner or thicker interfaces will require a different pad from the 0.5 mm, 1.5 mm, 2.0 mm or 3.0 mm options. The pad can be cut to shape but cannot conform to gaps outside its specified thickness range. It is not a liquid compound and will not flow into microscopic surface imperfections.
Replaces thermal paste or lower-grade pads
This pad replaces thermal grease where a solid, mess-free interface is preferred and upgrades from pads rated below 12 W/mK when higher conductivity is needed. The jump is worth it for builders who want a reusable, non-hardening solution that maintains performance over time without pump-out or dry-out issues.
Highlights
- 12 W/mK conductivity moves heat fast
- 120 × 20 mm sheet fits many layouts
- Non-conductive, non-corrosive, non-toxic safety
- 0 mm thickness bridges component gaps cleanly
- Supplied as a pair for dual installations
Specifications
No published specifications for this item yet.
Questions about this item
Should I choose the 1.0mm pad or one of the other thicknesses offered?
The pad is 1.0mm thick; other available thicknesses are 0.5mm, 1.5mm, 2.0mm and 3.0mm. Select the thickness that matches the gap between your component and the heatsink for optimal contact.
What does the 12 W/mK thermal conductivity rating mean for my GPU or CPU temperatures?
A 12 W/mK rating indicates very high heat-transfer capability for a pad, helping to lower component temperatures when it replaces a lower-conductivity pad or paste in the same mounting pressure.
Is the pad electrically conductive, and will it cause a short if it touches exposed circuitry?
The pad is non-electrically conductive, non-corrosive, non-hardening and non-toxic, so it will not cause short circuits if it contacts PCB traces or SMD components.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115165BTC
In stock
