We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular grey thermal pad 120 by 20 mm 2.0 mm thick

GELID SOLUTIONS

GELID SOLUTIONS GP-Extreme 120 x 20 mm 2.0 mm thermal pad

SKU CH-C8ZW-K9DP9

A 120 × 20 mm, 2.0 mm thick thermal pad rated at 12 W/m·K for RAM, VRM and M.2 SSD cooling

  • Ultimate thermal conductivity rated at 12 W/m·K
  • Non-electrically conductive for safe component contact
  • Non-corrosive, non-curing and non-toxic material
  • Soft 2.0 mm pad conforms to uneven PCB surfaces
  • 120 × 20 mm size fits large graphics-card and laptop heatsinks

Thermal pad for uneven PCB surfaces

The GELID SOLUTIONS GP-Extreme is a 120×20 mm thermal pad with a 2.0 mm thickness designed to bridge height differences on circuit boards. It targets memory ICs, MOSFETs, micro-controllers and similar SMD components found on graphics cards, laptops and consoles. The pad is non-electrical conductive, non-corrosive, non-curing and non-toxic.

Soft material simplifies fitting

The pad’s softness lets it conform to uneven surfaces without excessive pressure, making installation straightforward on large PCB areas. Because it does not cure, it remains pliable and can be repositioned if alignment shifts during fitting. No electrical conductivity removes the risk of shorting adjacent components.

Suits builders closing large gaps

This pad suits enthusiasts and repair technicians who need to transfer heat across variable stack heights on VGA cards, M.2 SSDs or VRM arrays. It is not intended for users who require a thin interface for flat CPU dies or those who prefer a liquid metal or paste solution for maximum conductivity on precision-machined surfaces.

Highlights

  • Ultimate thermal conductivity rated at 12 W/m·K
  • Non-electrically conductive for safe component contact
  • Non-corrosive, non-curing and non-toxic material
  • Soft 2.0 mm pad conforms to uneven PCB surfaces
  • 120 × 20 mm size fits large graphics-card and laptop heatsinks

Specifications

No published specifications for this item yet.

Questions about this item

How can I confirm the GP-Extreme 120×20 mm pad is performing correctly after installation?

Monitor component temperatures under load; the pad's 12 W/mK conductivity and soft 2.0 mm thickness should lower VRM, RAM or M.2 SSD temps noticeably compared to stock pads.

What does the single-piece package contain and is anything else required?

The box includes one 120×20 mm GP-Extreme thermal pad; no extra tools or compounds are needed for installation on uneven PCB surfaces.

Which GP-Extreme variant suits a graphics card VRM area with a 2 mm gap?

Choose the 2.0 mm thick, 120×20 mm pad rated at 12 W/mK — it matches the gap and covers large VRM zones on VGA cards.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.