We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 14AWG C19 to C20 power cord six feet long with molded connectors

GE C19 to C20 Power Cord 14AWG 6 Feet Black

SKU CH-YK87-FSMVJ

A 14 AWG C19 to C20 extension cord rated for 15 amps and 250 volts, six feet long for server rack power distribution

  • TypeC19 to C20
  • ColorBlack
  • Length6 Feet
  • Connector NumberMale-to-Male
  • Terminal GenderMale to Male
  • Specificationswininks, Black, 125 volts, 6, feet, Male-to-Male, true
  • Heavy-duty 14 AWG copper handles 15 A and 250 V loads
  • C19 female to C20 male extends reach inside server racks
  • Works with PDUs, UPS units, servers and network switches
  • Three-conductor grounded design with live, neutral and earth wires
  • Moulded connectors and strain relief resist vibration and accidental pulls

Power cord for server racks

The GE C19 to C20 extension cord uses 14 AWG pure copper conductors rated for 15 Amps and 250 Volts. It connects a C20 outlet on a PDU or UPS to equipment that requires a C19 inlet. The six-foot length provides reach inside cabinets without excess slack. Molded connectors with strain relief resist accidental disconnection.

Sustained load behaviour

Thick 14 AWG wire reduces voltage drop when equipment draws continuous current near the 15 Amp rating. Grounded three-conductor construction maintains safety during prolonged operation. The SJT jacket is intended for indoor environments such as data centres and network closets. Outdoor or wet-location use is not supported by the cable rating.

IEC 60320 interface limits

The cord implements the IEC 60320 C19/C20 connector pair, which is standard for high-power rack gear. It accepts supply voltages up to 250 V AC, covering both 120 V and 240 V distribution systems. Current capacity is limited to the 15 Amp rating of the cable assembly. Devices requiring higher amperage or a different connector standard cannot use this cord.

Highlights

  • Heavy-duty 14 AWG copper handles 15 A and 250 V loads
  • C19 female to C20 male extends reach inside server racks
  • Works with PDUs, UPS units, servers and network switches
  • Three-conductor grounded design with live, neutral and earth wires
  • Moulded connectors and strain relief resist vibration and accidental pulls

Specifications

BrandGE
TypeC19 to C20
ColorBlack
Length6 Feet
Connector NumberMale-to-Male
Terminal GenderMale to Male
Specificationswininks, Black, 125 volts, 6, feet, Male-to-Male, true
FeaturesMale-to-Male, true, 125 volts, Black, 6
Disclaimertrue

Questions about this item

Will the 14AWG cable run warm when powering a 15 A server load all day?

The 14 AWG copper conductors are rated for 15 A at 250 V, so normal continuous loads stay within the cable's thermal design.

My PDU only has C20 outlets — does this cord plug straight in?

Yes, the C20 male plug fits directly into any standard C20 outlet on a PDU or UPS.

Can I keep using my older C19-equipped rack gear with this extension?

The C19 female end accepts any standard C19 inlet, so existing servers, switches or PDUs connect without adapters.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.