We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular GE LED driver, matte grey finish, 7.8 by 1.7 by 1.6 inches

GE

GE 66923 60 W 120-277 V Constant Voltage LED Driver

SKU CH-QAY8-1B617

A 60-watt constant-voltage LED driver accepting 120-277 volt input for non-dimming lighting installations

  • Output Voltage120
  • Input Voltage120
  • 60 W output powers larger LED installations
  • 120-277 V input accepts global mains voltages
  • Constant-voltage design matches fixed-voltage LED loads
  • Compact 7.8" x 1.7" x 1.6" housing fits tight spaces

GE 66923 60 W Constant Voltage LED Driver

This GE 66923 driver supplies a 60 W constant-voltage output for LED loads. It accepts a 120-277 V input range and provides a 120 V output. The non-dimming unit measures 7.8" x 1.7" x 1.6" and is suited for installations that require a fixed-voltage power source.

Input range and dimming constraints

The driver operates only within the stated 120-277 V input window and delivers a fixed 120 V output. It does not support dimming control, so it cannot be used in circuits that require adjustable light levels. Verify that the load matches the 60 W rating and the output voltage before installation.

Highlights

  • 60 W output powers larger LED installations
  • 120-277 V input accepts global mains voltages
  • Constant-voltage design matches fixed-voltage LED loads
  • Compact 7.8" x 1.7" x 1.6" housing fits tight spaces

Specifications

BrandGE
Output Voltage120
Input Voltage120

Questions about this item

Should I choose the 60 W version or a higher-wattage driver for my LED load?

Select the 60 W driver when your total LED load stays at or below 60 watts; a higher-wattage unit is only needed if the load exceeds that figure.

What does the 120-277 V input range mean once the driver is installed?

It means the driver will operate on any supply between 120 V and 277 V without manual switching, so it works on standard 120 V circuits and 277 V commercial circuits alike.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.