We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact black rectangular LED driver with side terminals

GE

GE 66914 25 W 12 V Constant Voltage LED Driver

SKU CH-Y6JX-1Y7FZ

A 25 W constant-voltage LED driver delivering 12 V output with 120-277 V AC input and IP67 protection

  • IP67 rated for wet-location reliability
  • Compact form factor fits tight installations
  • Self-resetting short-circuit and thermal protection
  • 120-277 V AC input covers wide voltage range
  • 25 W constant-voltage output drives 12 V LED loads

GE 66914 25 W 12 V LED Driver

This GE 66914 unit is a constant voltage LED driver rated for 25 watts at 12 volts. It suits installers and DIY users who need a reliable power supply for low-voltage LED strips or fixtures in indoor or sheltered outdoor locations.

IP67 Rated Compact Housing

The driver carries an IP67 rating, meaning its enclosure resists dust ingress and temporary water immersion. A small form factor allows it to fit inside tight junction boxes or linear profiles. Built-in electronic protections cover short circuit, input voltage surge and thermal events with self-resettable operation.

Verify 120-277 V Supply and 12 V Load

Before ordering, confirm that your mains supply falls within the 120 to 277 volt AC input range. Ensure the connected LED load operates at 12 volts DC and does not exceed the 25 watt maximum output. The driver provides AC input and fast start-up without additional control gear.

Highlights

  • IP67 rated for wet-location reliability
  • Compact form factor fits tight installations
  • Self-resetting short-circuit and thermal protection
  • 120-277 V AC input covers wide voltage range
  • 25 W constant-voltage output drives 12 V LED loads

Specifications

BrandGE

Questions about this item

What does the 120-277 volt input range cap in practice for the GE 66914 driver?

It lets the 25 W, 12 V constant-voltage driver run on North American 120 V or 277 V commercial circuits without an external transformer.

What physical space does the small-form-factor IP67 housing of the GE 66914 need to fit or mount?

The compact, fully potted case is rated IP67 for wet locations and can be surface-mounted in tight junction boxes or outdoor enclosures.

How is the GE 66914 installed, and which wiring step do installers often get wrong?

Connect 120-277 V AC to the input leads, then wire the 12 V DC output to the LED load; reversing input and output is the common error.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.