We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five small high voltage generator modules with red and black cables

GCON

GCON High Voltage Generator DC 6-12V to 500-1000kV Arc Pulse Module 5pcs

SKU CH-C295-ZAJRN

A five-piece set of high-voltage arc pulse generators that step up DC 6-12 V input to 500-1000 kV output for science experiments and electronic projects

  • Delivers 500–1000 kV arc pulses from 6–12 V input
  • Achieves high efficiency through Tesla-coil transformer design
  • Includes 100 mm input and output cables for quick wiring
  • Simple peripheral circuit connects directly to switch and battery
  • Suits student experiments, electronic instruments and anion generators

High-Voltage Arc Generator Kit

This set contains five high-voltage generator modules that convert a DC 6V to 12V input into an output of about 500KV to 1000KV. Each module draws an input current of 2A to 5A and is suited for student science experiments, electronic instruments or small-scale anion generator projects.

Integration and Wiring Requirements

Every module ships with 100mm input and output cables; the red lead marks the positive connection. The peripheral circuit is simple, so the unit only needs a suitable battery or power supply and a switch to operate, freeing the builder from complex driver boards.

Sustained Discharge Behaviour

The modules use a high-voltage transformer and Tesla-coil principle to produce high-efficiency voltage pulses. Under continuous operation the discharge intensity remains strong, but the high output voltage demands careful insulation and safety clearance that are not covered by the kit itself.

Highlights

  • Delivers 500–1000 kV arc pulses from 6–12 V input
  • Achieves high efficiency through Tesla-coil transformer design
  • Includes 100 mm input and output cables for quick wiring
  • Simple peripheral circuit connects directly to switch and battery
  • Suits student experiments, electronic instruments and anion generators

Specifications

No published specifications for this item yet.

Questions about this item

How long can the module sustain 1000 kV output before the 5 A input limit trips?

The module draws 2 A to 5 A from a 6 V to 12 V supply; sustained arcs at the upper end of that current range will hit the supply limit first and shut down or sag voltage.

Does the 100 mm output cable stay cool during continuous arc operation?

The 100 mm high-voltage lead carries only brief high-frequency pulses, so it remains near ambient temperature, but the driver board and transformer warm noticeably after several minutes of non-stop firing.

What external power source and switch are needed to run one module?

A 6 V to 12 V battery or bench supply capable of 5 A, plus a simple toggle switch on the red-positive input lead, are all that is required to energise the module.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.