Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
GCON
Steps down 24V, 36V or 48V to 12V at 20A with 240W output, fully waterproof and protected against overload and short circuits
This GCON DC-DC converter steps 24V, 36V or 48V inputs down to a regulated 12V output at up to 20A and 240W. Its aluminium housing uses silicone sealing to achieve a 100% waterproof, dustproof and shockproof rating for harsh environments. Built-in protections cover input undervoltage, overload, overcurrent, overheat and output short-circuit conditions. Typical uses include automotive trucks, golf carts, LED strips, screens, surveillance systems, motors and DIY projects.
Installers powering 12V accessories from higher-voltage vehicle or cart batteries will find the wide input range and rugged sealing a direct fit. The unit lacks adjustable output voltage, so systems needing anything other than fixed 12V should look elsewhere. Buyers who require galvanic isolation or a step-up topology are not served by this buck-only design. Applications demanding more than 240W continuous power exceed the converter's rated headroom.
The converter comfortably runs 12V loads such as LED lighting, surveillance cameras or small motors up to the full 20A rating when adequately cooled by its case. Operation at the 60V input maximum increases internal dissipation, so sustained full-load use at the top of the input range may trigger thermal protection. Loads drawing significantly above 20A or requiring surge currents beyond the built-in overcurrent threshold will cause the unit to shut down.
No published specifications for this item yet.
Connect a DC supply between 20 V and 60 V — rated for 24 V, 36 V or 48 V systems — to the converter's input terminals.
Yes, the converter outputs a steady 12 V at up to 20 A, so your current 12 V lights, screens or motors can stay connected.
Measure the output with a multimeter under load; it should read 12 V while the aluminum shell remains cool and no protection fault triggers.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?