We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact rectangular converter with silver aluminium housing and screw terminals

GCON

GCON 8-36V to 12V 10A 120W Buck-Boost Converter

SKU CH-JDDX-PDAKK

Ultrathin 8-36V to 12V 10A buck-boost converter with IP65 housing and multiple protections

  • Converts 8–36 V input to stable 12 V output
  • Delivers 10 A continuous current for 120 W loads
  • IP65 aluminium housing resists water and dust
  • Built-in over-temperature, over-current, over-voltage and short-circuit protection
  • Wiring diagram printed on the case for straightforward DIY installation

Ultrathin IP65 Buck-Boost Converter

This GCON buck-boost converter steps a DC input between 8 and 36 volts down or up to a steady 12 volts at 10 amps. Its waterproof aluminium housing rated IP65 suits outdoor or vehicle installations such as golf carts, marine electronics or solar rigs. The unit delivers up to 120 watts of continuous power.

Thermals and Protection

Built-in over-temperature, over-current, over-voltage and output short-circuit protections shut the converter down before components overheat. The aluminium case doubles as a heatsink, allowing silent passively cooled operation at full 120 watt load. No fan noise is produced during normal use.

Fixed 12 Volt 10 Amp Output

The output voltage is fixed at 12 volts with a rated current of 10 amps, so the converter only fits loads that match those exact figures. It cannot supply adjustable voltages, higher currents or different output voltages required by other 12 volt devices.

Highlights

  • Converts 8–36 V input to stable 12 V output
  • Delivers 10 A continuous current for 120 W loads
  • IP65 aluminium housing resists water and dust
  • Built-in over-temperature, over-current, over-voltage and short-circuit protection
  • Wiring diagram printed on the case for straightforward DIY installation

Specifications

No published specifications for this item yet.

Questions about this item

How do I wire the GCON buck-boost converter and which step do people often get wrong?

Connect the INPUT terminals to your 8 V to 36 V DC source and the OUTPUT terminals to the 12 V load; the printed diagram on the back shows the layout. The most common mistake is reversing the input and output connections, which the instructions explicitly warn against.

What maintenance or replacement will this IP65 converter need over time?

The sealed aluminum housing is rated IP65, so no routine internal maintenance is required. If the unit ever trips its over-temperature, over-current, over-voltage or short-circuit protection, let it cool and check the wiring before restarting; otherwise it runs until a fault forces replacement.

What is the first limit I will hit when running this converter continuously at full load?

The converter is rated for 120 W output (12 V at 10 A). Sustained operation at that level will eventually trigger the built-in over-temperature protection, which is the first hard limit under continuous heavy use.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.