We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular metal power supply with cooling vents and fan, silver finish

GCON

GCON 60V 10A 600W AC to DC Switching Power Supply Adapter

SKU CH-7RXR-1V1MX

Converts 110V or 220V AC to 60V DC at up to 10A for drives, sensors, LED strips and automation gear

  • Delivers stable 60 V DC from 110 V or 220 V AC input
  • Peak output 600 W at 10 A for demanding 60 V equipment
  • Aluminium alloy case with built-in fan and vented holes keeps temperatures low
  • Weighs .75 kg and measures 21.5 × 11.5 × 5 cm for tight installations
  • Over-voltage, under-voltage and over-temperature protection extends service life

Power Supply for 60 V Equipment

This GCON adapter converts 110 V or 220 V AC mains into a regulated 60 V DC output rated at 10 A and 600 W peak. It is intended for semiconductor drives, amplifiers, radios, LED strips, CCTV systems, car jacks and similar 60 V automation gear. The unit is not suitable for battery charging or speed-control motor applications.

Thermals and Power Draw

An aluminium alloy enclosure with multiple ventilation holes and a built-in cooling fan provides forced-air cooling for stable operation. The supplier specifies a derating rule: continuous load must not exceed 80 % of the 600 W peak, so resistive equipment should stay under 8 A and 480 W. Over-voltage, under-voltage and over-temperature protections are included.

Build and Connectivity

The compact housing measures 21.5 × 11.5 × 5 cm and weighs 0.75 kg, allowing installation in tight equipment cabinets. Input and output terminals accept standard wiring for AC mains and 60 V DC loads respectively. Because motor starting currents can far exceed rated power, the supplier advises that peak SMPS capacity should be at least twice the motor rating for such loads.

Highlights

  • Delivers stable 60 V DC from 110 V or 220 V AC input
  • Peak output 600 W at 10 A for demanding 60 V equipment
  • Aluminium alloy case with built-in fan and vented holes keeps temperatures low
  • Weighs .75 kg and measures 21.5 × 11.5 × 5 cm for tight installations
  • Over-voltage, under-voltage and over-temperature protection extends service life

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the GCON 60V 600W supply and what wiring step causes the most problems?

Connect the AC input to a 110V or 220V mains source, then attach the 60V DC output to your load. The step most often missed is applying the 80% derating rule: the continuous load must stay at or below 8A and 480W, not the peak 10A 600W rating.

What maintenance or replacement will this power supply need over time?

The built-in cooling fan is the only moving part and will eventually wear out. Keep the aluminum alloy shell's ventilation holes clear of dust so the fan does not run hotter than necessary, which extends its service life.

What limit appears first when the unit runs continuously at high load?

The 80% derating limit is reached first: sustained output above 8A or 480W triggers the over-temperature or over-voltage protection, causing the supply to shut down until it cools.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.