We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular silver aluminium box with red, black and yellow wires emerging from each end

GCON

GCON 24V to 12V 30A 360W Step-Down Buck Converter

SKU CH-0AS5-P9CE6

Converts 24V DC input to 12V DC output at 30A with IP68 waterproof housing and multiple protections

  • Converts 24V input to stable 12V output
  • Delivers 30A continuous current for 360W devices
  • IP68 waterproof aluminium housing protects against moisture
  • Built-in over-temperature, over-current, over-voltage and short-circuit protection
  • Labelled wiring diagram enables straightforward DIY installation

What this converter does

This GCON buck converter steps a 24 V DC source down to a regulated 12 V DC output rated at 30 A and 360 W. It accepts an input range of 18 V to 36 V and is built into an IP68-rated aluminium housing for waterproof operation. Typical uses include golf carts, club cars, LED lighting, audio equipment and other 12 V accessories that run from a 24 V system. The unit ships new with colour-coded input and output leads and a wiring diagram on the case.

Sustained-load behaviour

The converter includes over-temperature, over-current, over-voltage and output short-circuit protection to maintain safe operation during continuous use. Rated output current and power are specified at 30 A and 360 W rather than as peak figures. A stable DC supply within the 18 V to 36 V window is recommended to keep the output steady under load. The aluminium case acts as a heatsink to help dissipate heat during extended runs.

Check before ordering

Verify that your source voltage stays between 18 V and 36 V DC under all operating conditions. Confirm that the total connected load does not exceed 30 A at 12 V. Ensure wiring polarity matches the red and black input leads and the yellow and black output leads before applying power. The IP68 housing suits wet or dusty environments but the unit is not designed for AC input or for systems requiring a different output voltage.

Highlights

  • Converts 24V input to stable 12V output
  • Delivers 30A continuous current for 360W devices
  • IP68 waterproof aluminium housing protects against moisture
  • Built-in over-temperature, over-current, over-voltage and short-circuit protection
  • Labelled wiring diagram enables straightforward DIY installation

Specifications

No published specifications for this item yet.

Questions about this item

How hot or noisy does the IP68 aluminium housing get when the converter runs at 30 A continuously?

The sealed IP68 aluminium case acts as a heatsink with no fan, so it runs silently; surface temperature will rise under full 30 A load but built-in over-temperature protection shuts the unit down before damage occurs.

What must I already have to wire this converter into my golf cart?

You need a stable 18–36 V DC source (for example a 24 V battery pack) and the ability to connect the red and black input leads to that source, then the yellow and black output leads to your 12 V accessories.

Will the 12 V output stay clean if my cart's 24 V system drops to 18 V or spikes to 36 V?

Yes, the buck topology regulates a steady 12 V across the full 18–36 V input range, and over-voltage, over-current and short-circuit protection guard connected gear during transients.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.