GCON
GCON 10 W AC/AC transformer 110 V to 12 V 50 Hz
A 10 W AC/AC transformer converting 110 V to 12 V at 50 Hz for synchronous motors and small equipment
- 10 W rated power for low-draw AC equipment
- 110 V AC input at 50 Hz for standard mains supply
- 12 V AC single output suits synchronous motors
- Mounting holes allow secure chassis installation
- Colour-coded leads simplify wiring connections
10 W AC/AC transformer for 110 V supply
This power transformer steps 110 V AC at 50 Hz down to 12 V AC with a rated output of 10 W. It is a single-phase unit intended for low-power equipment such as lighting circuits, audio devices, instrumentation or energy-saving control lines. Mounting holes allow secure chassis installation. The colour-coded leads identify the two red input wires and two blue output wires for straightforward wiring.
Passive cooling and low power draw
The transformer relies on natural convection and has no fan, so it operates silently in normal use. With only 10 W of rated throughput, heat dissipation is minimal and suits enclosed cabinets where airflow is limited. Power consumption on the primary side matches the rated load plus normal transformer losses, keeping running costs low for continuous-duty applications.
Mounting hardware and wiring simplicity
The package includes the transformer itself; no additional brackets, cables or software are supplied. Mounting holes are integrated into the laminations, so the unit bolts directly to a panel or enclosure. The fixed red and blue lead colours reduce wiring errors during installation or maintenance.
Highlights
- 10 W rated power for low-draw AC equipment
- 110 V AC input at 50 Hz for standard mains supply
- 12 V AC single output suits synchronous motors
- Mounting holes allow secure chassis installation
- Colour-coded leads simplify wiring connections
Specifications
No published specifications for this item yet.
Questions about this item
How do I wire the GCON 10 W transformer and which step is often missed?
Connect the two red wires to the 110 V 50 Hz supply and the two blue wires to the 12 V AC load; the step often missed is securing the unit with its mounting holes before energising.
What maintenance or replacement will this transformer need over time?
The sealed single-phase design has no user-serviceable parts; if output voltage drifts or the unit overheats under the 10 W rating, replace the whole transformer.
What limit appears first when the transformer runs continuously at full load?
The 10 W thermal limit is reached first; sustained operation at 12 V AC output near that rating will cause temperature rise that eventually triggers protective shutdown or permanent damage.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.0011494BTC
In stock
