We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Fuji Labs

Fuji Labs CAT8-BL7STP-WH network ethernet cable 7 ft white

SKU CH-35F8-V2XD7 MPN CAT8-BL7STP-WH

A 7 ft white Cat8 patch cable with 24 AWG stranded copper, S/FTP shielding and gold-plated RJ45 contacts rated for 40 Gbps at 2 GHz

  • Length7 ft.
  • ColorWhite
  • Supports up to 40 Gbps data rate with 2 GHz bandwidth
  • Each pair foil shielded plus overall braid shield reduces interference
  • 24 AWG stranded pure copper conductors ensure reliable signal
  • 50 micron gold-plated RJ45 contacts resist corrosion
  • Backwards compatible with Cat5e, Cat6, Cat6a and Cat7

7 ft Cat8 S/FTP cable for 40 Gbps networks

This seven-foot white patch cord uses four stranded 24 AWG pure-copper pairs, each foil-wrapped and covered by an overall braid shield, to deliver up to 2 000 MHz bandwidth and 40 Gbps data rates. Gold-plated RJ45 contacts rated at 50 micron resist corrosion in dense patch panels. The PVC jacket meets UL and ETL verified TIA/EIA compliance and RoHS requirements. It targets installers who need certified Cat8 performance in short runs.

Installation notes and common pitfalls

The cable plugs into any RJ45 port and is backwards compatible with Cat5e, Cat6, Cat6A and Cat7 equipment, so no special tools or configuration are required. Stranded conductors make the cord flexible for tight bends behind racks or desks, but the double shielding adds bulk that can snag on sharp cabinet edges if pulled carelessly. Ensure the boot fully seats to maintain the shield connection; a partially inserted plug is the most frequent cause of intermittent link errors.

Sustained-load behaviour

Under continuous 40 Gbps throughput the foil and braid shielding keeps alien crosstalk low, maintaining the 2 GHz channel margin without the signal degradation seen on lighter cables during long transfers. The pure-copper conductors limit resistive heating, so performance stays stable during extended backup or streaming sessions. The PVC jacket does not stiffen noticeably after prolonged warm operation, preserving routing flexibility for future moves.

Highlights

  • Supports up to 40 Gbps data rate with 2 GHz bandwidth
  • Each pair foil shielded plus overall braid shield reduces interference
  • 24 AWG stranded pure copper conductors ensure reliable signal
  • 50 micron gold-plated RJ45 contacts resist corrosion
  • Backwards compatible with Cat5e, Cat6, Cat6a and Cat7

Specifications

Length7 ft.
ColorWhite
Shipping weight0.09 kg
Package size152 × 152 × 25 mm

Questions about this item

How do I confirm the 40 Gbps link is active after plugging in this 7 ft Cat8 cable?

Check the link speed in your OS network adapter settings or router status page — it should report 40 Gbps when both ends support Cat8.

What comes with the cable and do I need anything else?

The box contains the 7 ft white Cat8 S/FTP patch cable with RJ45 connectors; no extra parts are required for a standard Ethernet connection.

Should I choose this 7 ft white version or a different length?

Pick the 7 ft white cable when the run between devices is roughly that distance; other lengths exist if you need more or less reach.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.