We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey Cat 8 Ethernet cable, one foot long, S/FTP shielded, PVC jacket, gold-plated RJ45 connectors

Fuji Labs

Fuji Labs CAT8-BL1STP-GY network ethernet cable 1 ft grey

SKU CH-9H7C-SS01P MPN CAT8-BL1STP-GY

One-foot Cat 8 patch cable with double shielding and gold-plated RJ45 contacts, rated for 2,000 MHz bandwidth and 40 Gbps data rates

  • CatCAT 8
  • Length1 ft.
  • ColorGrey
  • ShieldedEach pair Foil shielded / 4 Pair Braid Shield
  • Supports up to 40 Gbps data rates for fast network transfers
  • 2000 MHz bandwidth enables high-frequency signal integrity
  • Double shielding with foil and braid reduces electromagnetic interference
  • Gold-plated RJ45 contacts resist corrosion for reliable connections
  • Backwards compatible with Cat 5e, Cat 6, Cat 6A and Cat 7 equipment

1 ft Cat 8 S/FTP patch cable

This one-foot Cat 8 patch cable uses 24 AWG stranded pure copper conductors with individual foil shielding and an overall braid shield. It is built for short runs between switches, servers or workstations that require 40 Gbps throughput. The RJ45 plugs carry 50 micron gold-plated contacts and follow T568B wiring. Grey PVC jacket completes the assembly.

Shielded construction and signal integrity

Each twisted pair is foil wrapped and the four pairs sit under a braided shield, suppressing alien crosstalk and EMI in dense racks. The stranded conductors keep the cable flexible for tight patch-panel routing while maintaining the 2 000 MHz bandwidth rating. Gold-plated contacts resist oxidation over repeated insertions. UL and ETL verified to TIA/EIA standards, RoHS compliant.

Sustained 40 Gbps over the full length

The cable is rated for 40 Gbps across its entire one-foot length, not just in burst tests. Backwards compatibility with Cat 5e, Cat 6, Cat 6A and Cat 7 means it can be deployed in mixed-category environments without re-termination. Shielding continuity is maintained end-to-end, so performance holds under continuous load in data-centre or high-density office settings.

Highlights

  • Supports up to 40 Gbps data rates for fast network transfers
  • 2000 MHz bandwidth enables high-frequency signal integrity
  • Double shielding with foil and braid reduces electromagnetic interference
  • Gold-plated RJ45 contacts resist corrosion for reliable connections
  • Backwards compatible with Cat 5e, Cat 6, Cat 6A and Cat 7 equipment

Specifications

CatCAT 8
Length1 ft.
ColorGrey
ShieldedEach pair Foil shielded / 4 Pair Braid Shield
Shipping weight0.03 kg
Package size127 × 127 × 25 mm

Questions about this item

How do I install the 24AWG stranded copper cable with RJ45 connectors without damaging the gold-plated contacts?

Align the RJ45 plug with the port, press straight in until the tab clicks, and avoid bending the cable sharply near the connector to protect the 50 micron gold-plated contacts.

What maintenance or replacement will the PVC-jacketed S/FTP cable need over time?

Inspect the PVC jacket periodically for cracks or kinks; replace the cable if the foil and braid shielding is compromised or if the RJ45 tab breaks.

At what point does the 2GHz bandwidth limit appear during sustained 40Gbps transfers?

The 2000 MHz bandwidth ceiling is reached when signal frequency approaches 2GHz, which can limit sustained 40Gbps throughput over the 1 ft length.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.