We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 10 ft Cat8 S/FTP Ethernet cable with gold RJ45 plugs

Fuji Labs

Fuji Labs CAT8-BL10STP-WH network ethernet cable 10 ft white 24AWG 2000 MHz 40Gbps 50 micron gold RJ45

SKU CH-VHQ6-XYRGZ MPN CAT8-BL10STP-WH

A 10 ft white Cat8 patch cable with 24AWG stranded copper, S/FTP shielding and 50 micron gold RJ45 contacts, rated for 2000 MHz bandwidth and 40Gbps data rates

  • Length10 ft.
  • ColorWhite
  • Supports 40Gbps throughput with 2000 MHz bandwidth
  • 24AWG pure copper conductors for reliable signal integrity
  • Double shielding blocks crosstalk and external interference
  • 50 micron gold RJ45 contacts resist corrosion
  • Backwards compatible with Cat5e Cat6 Cat6a Cat7 networks

Fuji Labs Cat8 10 ft white cable

This Fuji Labs Cat8 patch cable uses 24AWG stranded pure copper conductors with individual foil shielding and an overall braid shield. It terminates in RJ45 plugs with 50 micron gold plated contacts and a PVC jacket. The cable is rated for up to 2000 MHz bandwidth and up to 40Gbps data rates.

Suits 40GbE runs needing S/FTP shielding

It suits installers who need a 10 ft white cable certified to TIA/EIA standards by UL and ETL with RoHS compliance. It is backwards compatible with Cat5e, Cat6, Cat6A and Cat7 equipment. Buyers who need a different length, a different jacket colour or a non-shielded UTP construction should look at something else.

2000 MHz bandwidth rating decides fit

The single specification that decides fit is the 2000 MHz (2 GHz) bandwidth rating supporting up to 40Gbps over copper. If the target link requires that frequency headroom, this cable meets it; if the installation only requires Cat6A or Cat7 performance, a lower-category cable will also work.

Highlights

  • Supports 40Gbps throughput with 2000 MHz bandwidth
  • 24AWG pure copper conductors for reliable signal integrity
  • Double shielding blocks crosstalk and external interference
  • 50 micron gold RJ45 contacts resist corrosion
  • Backwards compatible with Cat5e Cat6 Cat6a Cat7 networks

Specifications

Length10 ft.
ColorWhite
Shipping weight0.09 kg
Package size152 × 152 × 25 mm

Questions about this item

What connector spacing does the 24 AWG stranded cable need at the RJ45 plug?

The cable uses standard RJ45 plugs with 50 micron gold contacts, so any keystone jack, patch panel or switch port wired to the TIA/EIA pin-out will accept it without special spacing.

Which termination step is most often missed when fitting the foil-and-braid shielded pairs?

The braid shield must be folded back and secured under the plug's strain-relief tab so it makes contact with the metal shell; skipping this step breaks the grounding path.

When should the PVC jacket be inspected for replacement?

Check the white PVC jacket whenever the cable is routed near heat sources or sharp edges; replace it if the jacket shows cracking, discoloration or if the braid shield becomes visible.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.