We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White sleeved 16-pin 12VHPWR modular cable with three cable combs, 700mm length

FormulaMod

FormulaMod PCIe 5.0 12VHPWR 16pin Sleeved Modular Cable White

SKU CH-VNX6-GWMZ1

White 16 AWG sleeved cable with dedicated combs carries 600 W over 700 mm for RTX 40 series and 3090 Ti cards

  • ColorWhite
  • Supports RTX 40 series and 3090Ti with native 12VHPWR connector
  • 16 AWG tinned copper handles up to 600 W without overheating
  • Three-layer braid and 700 mm length give clean routing in any build
  • Dedicated 12+4 pin combs keep wires aligned for a tidy interior
  • Male-to-male modular design plugs straight into PSU and GPU with no adapters

White 12VHPWR cable for RTX 40 and 3090Ti

This FormulaMod cable connects a modular power supply directly to a 16-pin 12VHPWR graphics-card connector. It is built for owners of RTX 40-series cards or the 3090Ti who want a clean white sleeved link without replacing their PSU. The 700 mm length suits most mid-tower builds.

Sustained load on 16 AWG tinned copper

The cable uses 16 AWG tinned copper with a three-layer braid rated for continuous draws above 600 W. Under prolonged full-load sessions the conductors stay cool and resistance remains low, so voltage delivery to the GPU is stable. Three dedicated combs keep the 12+4 wires aligned and prevent sag near the connector.

Replaces native 12VHPWR leads or adapter bundles

Builders upgrading to a 12VHPWR card can swap a short or stiff factory cable for this longer, more flexible white run. It is not for systems that lack a modular 12VHPWR port on the PSU side or for owners who need multiple GPU power cables from a single kit.

Highlights

  • Supports RTX 40 series and 3090Ti with native 12VHPWR connector
  • 16 AWG tinned copper handles up to 600 W without overheating
  • Three-layer braid and 700 mm length give clean routing in any build
  • Dedicated 12+4 pin combs keep wires aligned for a tidy interior
  • Male-to-male modular design plugs straight into PSU and GPU with no adapters

Specifications

ColorWhite

Questions about this item

Does the 16 AWG cable run hot when the 12VHPWR link is pulling 600 W all day?

The 16 AWG tinned copper wire uses a three-layer braid designed to run at full load without getting hot, with low resistance and a maximum power rating above 600 W.

What PSU connectors must I already have to use this male-to-male 16-pin cable?

Your PSU must provide three PCIe 8-pin outputs so they can be converted to the single 12+4-pin 12VHPWR plug on the graphics card.

Will this white sleeved cable fit cleanly alongside an older RTX 3090 Ti in a tight case?

The 700 mm length and three dedicated 12+4-pin combs let you route the cable neatly, but avoid sharp bends near the connector and seat it fully in the card’s power port.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.