We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black sleeved 16-pin 12VHPWR cable with three combs, 700mm length

FormulaMod

FormulaMod PCIe 5.0 12VHPWR 16-pin Internal Power Cable Black

SKU CH-QDVV-5TRZY

PCIe 5.0 12VHPWR cable with 16 AWG tinned copper wire supports 600 W for RTX 40 series and 3090 Ti and includes three dedicated cable combs for neat routing

  • ColorBlack
  • PCIe 5.0 ready cable supports RTX 40 series and 3090 Ti
  • 16 AWG tinned copper handles up to 600 W without overheating
  • 700 mm length gives flexible routing inside the case
  • Three dedicated combs keep the 12+4 pin wires tidy
  • Male-to-male modular design connects direct to PSU and GPU

FormulaMod PCIe 5.0 12VHPWR Cable

This FormulaMod internal power cable delivers a 16-pin 12VHPWR male-to-male connection for modern graphics cards. It targets builders upgrading to RTX 40-series or 3090 Ti GPUs without replacing their existing power supply. The 700 mm length suits standard mid-tower layouts while keeping cable runs manageable.

16 AWG Tinned Copper With Dedicated Combs

The cable uses 16 AWG tinned copper wire in a three-layer braided sleeve rated for loads exceeding 600 W. Three custom 12+4-pin combs are included to align the sixteen conductors neatly near the connector. Builders can slide the combs into position for a clean look, though the sense wires require gentle handling during adjustment.

Replaces Native 12VHPWR Leads Or Adapter Bundles

This single cable replaces a missing native 12VHPWR lead on modular PSUs or bulky multi-plug adapter bundles that occupy three 8-pin ports. The jump is worth it when the PSU already offers a 16-pin 12VHPWR output and the builder wants a shorter, sleeved run with integrated combs. It does not add a 12VHPWR port to PSUs lacking one.

Highlights

  • PCIe 5.0 ready cable supports RTX 40 series and 3090 Ti
  • 16 AWG tinned copper handles up to 600 W without overheating
  • 700 mm length gives flexible routing inside the case
  • Three dedicated combs keep the 12+4 pin wires tidy
  • Male-to-male modular design connects direct to PSU and GPU

Specifications

ColorBlack

Questions about this item

What does the PCIe 5.0 12VHPWR 16-pin interface support in practice?

The cable carries up to 600 W through 16 AWG tinned copper conductors and is built for RTX-40 series and 3090Ti graphics cards.

What clearance and mounting points does the 700 mm cable need?

It requires a PSU with a native 16-pin 12VHPWR port and a graphics card with a matching 16-pin 12VHPWR socket; three dedicated combs are included for routing.

How is the cable installed and what step do people get wrong?

Plug each end fully into the PSU and GPU 16-pin ports, then slide the combs slowly into position — forcing them can damage the sense wires, and sharp bends near the connector must be avoided.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.