We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Sleeved internal power cable kit in blue, black, grey and white with pre-bent 180° connectors and combs

FormulaMod

FormulaMod Internal Power Cable Kit 18AWG 24Pin ATX 8Pin EPS 8Pin PCIe 180° Blue Black Grey White

SKU CH-AYSK-H0M1W

Pre-bent 180° sleeved 18AWG cable kit with 24-pin ATX, 8-pin EPS and two 8-pin PCIe connectors in blue, black, grey and white

  • ColorBlue& Black&Grey&White

Color Blue& Black&Grey&White

Struck-through versions exist but are not stocked here.

  • 18 AWG wires deliver stable power to CPU and GPU
  • 24 pin ATX plus 8 pin EPS and two 8 pin PCIe cables cover full system
  • Pre-bent 180 degree connectors align with latch orientation for clean routing
  • Heat-shrink-free sleeves give a sleek look and easier cable combs
  • Blue black grey white colour mix matches themed builds

Cable Kit Contents

This FormulaMod kit provides an ATX 24-pin cable, one EPS 8-pin cable and two PCIe 8-pin cables. All wires are 18 AWG and wrapped in a high-density flexible sleeve with a heat-shrink-less finish. The blue, black, grey and white colour mix is matched with several cable combs for tidy routing.

Pre-Bent 180° Compatibility

The cables are pre-bent at 180° using the connector buckle as a reference. ATX and EPS connectors bend toward the buckle side while PCIe connectors bend away from it. Builders whose motherboard or graphics card have the buckle on the opposite side should look at a different kit.

Installation Notes

Route each cable and snap the supplied combs into place to keep the sleeving aligned. The stiff yet adaptable sleeve holds the bend but still allows adjustment inside the case. The only common issue is mismatched buckle orientation, so verify the connector layout before fitting.

Highlights

  • 18 AWG wires deliver stable power to CPU and GPU
  • 24 pin ATX plus 8 pin EPS and two 8 pin PCIe cables cover full system
  • Pre-bent 180 degree connectors align with latch orientation for clean routing
  • Heat-shrink-free sleeves give a sleek look and easier cable combs
  • Blue black grey white colour mix matches themed builds

Specifications

ColorBlue& Black&Grey&White

Other versions of this model

1 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 24-pin ATX cable reach my motherboard if my power supply sits at the bottom of the case?

The 24-pin ATX cable uses 18 AWG wire and a pre-bent 180° connector oriented toward the buckle side; measure from your PSU to the motherboard socket to confirm reach.

Can I keep my existing 8-pin EPS and 8-pin PCIe cables and just add these sleeved extensions?

Yes, the kit provides one 8-pin EPS (4+4) and two 8-pin PCIe (2+6) extensions that plug into your current PSU cables, provided the buckle orientation matches the pre-bent 180° direction.

How do I verify the pre-bent 180° connectors are seated correctly after routing?

Check that each ATX 24-pin and EPS 8-pin connector bends toward its buckle while each PCIe 8-pin bends away from its buckle; all latches should click securely into the motherboard or GPU sockets.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.