We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten transparent solderless connectors and a 16.4 ft extension cable on a light background

Flutesan 10 Pack Solderless LED Strip Connector 4 Pin 10 mm 16.4 ft Extension Cable

SKU CH-SPMR-1N2Z5

Ten solderless 4-pin connectors plus 16.4 ft of 10 mm tin-plated copper cable for quick, tool-free LED strip links

  • ColorRetro Style
  • Length< 1"
  • Connector Number2
  • Connector DetailRetro
  • Specifications4 Pin, 10 mm, Flutesan, 16.4, feet, Retro Style, 1, Tin Plat
  • ConductorTin Plated Copper
  • Solderless design connects strips without tools or stripping
  • 10 connectors plus 16.4 ft cable covers multiple runs
  • Tin-plated copper conductors give stable low-resistance links
  • Fits 10 mm 4-pin strips at 5 V, 12 V or 24 V
  • Transparent tough housings reduce dark spots at joints

Solderless LED strip kit with 16.4 ft cable

This kit bundles ten transparent 4-pin connectors and one 16.4 ft extension cable built from tin-plated copper conductors. It is aimed at DIY installers who need quick, tool-free joints for 10 mm LED tape in decorative or accent lighting projects. The connectors accept solid or multi-core wire without stripping or soldering.

Suits 10 mm strips at 5 V, 12 V or 24 V.

The connectors work with 10 mm wide strips and 22 AWG 5-conductor wire across common low-voltage rails. They will not fit 8 mm tape, 3528 LED strips or 20 AWG wire. Builders needing those widths or gauges should look at a different connector series.

Ten connectors plus one long cable reduce joint

Ten solderless blocks let you join or branch multiple runs from a single 16.4 ft length of tin-plated copper cable. The push-in guide slots eliminate stripping and soldering, while the transparent housings keep polarity visible during assembly. A small screwdriver can reopen a closed cap if needed.

Highlights

  • Solderless design connects strips without tools or stripping
  • 10 connectors plus 16.4 ft cable covers multiple runs
  • Tin-plated copper conductors give stable low-resistance links
  • Fits 10 mm 4-pin strips at 5 V, 12 V or 24 V
  • Transparent tough housings reduce dark spots at joints

Specifications

BrandFlutesan
ColorRetro Style
Length< 1"
Connector Number2
Connector DetailRetro
Specifications4 Pin, 10 mm, Flutesan, 16.4, feet, Retro Style, 1, Tin Plated Copper, 2, Retro, 0.31 pounds
ConductorTin Plated Copper
Construction1, Tin Plated Copper
Features4 Pin, 10 mm, Tin Plated Copper, Retro Style, 2, 1, Flutesan

Questions about this item

Do I need a 10 mm wide LED strip for these 4 Pin connectors to fit?

Yes, the 10 connectors are built for 10 mm strips and will not suit 8 mm or 12 mm widths.

Can I keep my 22 AWG multi core wire and still use the 16.4 ft extension cable?

The cable works with 22 AWG 5 conductor, solid and multi core wires, but 20 AWG wire is not supported.

How do I verify the tin plated copper cable is conducting after I press the caps closed?

Confirm the + and – polarity marks line up, then power the strip; the LEDs should light evenly along the 16.4 ft run.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.