We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular plastic cable identifier with numbered plug and connector port

FLUKE networks

FLUKE networks WIREVIEW 1 cable identifier pc tool

SKU CH-980T-MG8X6 MPN WIREVIEW 1

Cable identifier accessory for verifying wiremaps and tracing unlabelled runs with compatible NETSCOUT testers

  • SpecificationsProduct Type:Cable Analyzer
  • Identifies cable runs with numbered plugs
  • Works with OneTouch AT and LinkRunner AT testers
  • Provides wiremap results on installed links
  • EtherScope reads adapter ID automatically
  • Accessory for NTS2, ES, ES2 and OPV INA

Purpose-built cable identifier

The Fluke Networks WireView 1 is a cable testing accessory designed for network technicians and installers who need to trace and verify installed cable links. It works with the NETSCOUT OneTouch AT Network Assistant or LinkRunner AT Network Auto-Tester to identify wiremap results and map wall jacks to switch ports.

Replaces manual tracing methods

This adapter removes the need for time-consuming tone tracing or visual inspection when outlet labels are missing or incorrect. The upgrade is worth it whenever a technician faces unlabelled or mislabelled work-area outlets and must quickly confirm the exact cable path to the patch panel or switch.

Handles single-cable identification per test

Each WireView 1 unit provides one numbered far-end identifier, so a single cable run is mapped per insertion. It does not support simultaneous multi-cable scanning, and it requires a compatible NETSCOUT tester to operate; standalone use is not possible.

Highlights

  • Identifies cable runs with numbered plugs
  • Works with OneTouch AT and LinkRunner AT testers
  • Provides wiremap results on installed links
  • EtherScope reads adapter ID automatically
  • Accessory for NTS2, ES, ES2 and OPV INA

Specifications

BrandFluke Networks
ModelWIREVIEW 1
SpecificationsProduct Type:Cable Analyzer
Shipping weight0.36 kg
Package size25 × 25 × 25 mm

Questions about this item

Does the WireView 1 plug directly into a wall jack for cable identification?

The WireView 1 is a far-end adapter that connects to the installed cable link so the tester can read its ID and report wiremap results.

How is the WireView 1 used with the OneTouch AT or LinkRunner AT during installation?

Plug the adapter into the far end of the cable run; the tester reads the adapter ID and displays the wiremap on the Cable Verification screen.

Will the WireView 1 adapter itself require calibration or replacement over time?

The adapter is a passive numbered plug with no batteries or firmware; it does not require calibration and only needs replacement if the housing or contacts are physically damaged.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.