We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular NiMH battery pack, black ABS case, 7.2V 3500mAh

FLUKE networks

FLUKE networks BP7235 7.2V 3500mAh NiMH tester

SKU CH-QHM7-7FWAG MPN BP7235

Rechargeable 7.2 V 3500 mAh NiMH pack powers Fluke 700 or 740 calibrators for up to 16 hours

  • SpecificationsBattery Rechargeable: Yes Battery Chemistry: Nickel-Metal Hy
  • Rechargeable NiMH chemistry reduces waste
  • 2 V DC output powers 700 or 740 Calibrator
  • 3500 mAh capacity delivers typical 16-hour run time
  • Six 1.2 V cells housed in custom ABS/PC case
  • Weighs 11 oz for portable field use

Replacement pack for Fluke 700 and 740 calibrators

This 7.2 V nickel-metal hydride battery pack is built to power Fluke 700 or 740 calibrators. It contains six 1.2 V cells housed in a custom-moulded ABS and polycarbonate blend case. The pack is rechargeable and intended for field technicians who need reliable portable power for calibration work.

Sustained runtime of 16 hours per charge

Under continuous use the pack delivers approximately 16 hours of operation before recharging is required. The 3500 mAh capacity supports long shifts without a mid-day swap. Rechargeable NiMH chemistry maintains consistent voltage output across the discharge cycle for stable calibrator performance.

7.2 V output matches calibrator input requirement

The calibrator requires a 7.2 V DC supply and this pack provides exactly that voltage. Using a pack with a different voltage would prevent the instrument from operating correctly. Verify that your device is a Fluke 700 or 740 series before fitting this battery.

Highlights

  • Rechargeable NiMH chemistry reduces waste
  • 2 V DC output powers 700 or 740 Calibrator
  • 3500 mAh capacity delivers typical 16-hour run time
  • Six 1.2 V cells housed in custom ABS/PC case
  • Weighs 11 oz for portable field use

Specifications

BrandFluke Networks
ModelBP7235
SpecificationsBattery Rechargeable: Yes
Battery Chemistry: Nickel-Metal Hydride (NiMH)
Battery Capacity: 3500 mAh
Output Voltage: 7.2 V DC
Maximum Battery Run Time: 16 Hour
Weight (Approximate): 11 oz
Shipping weight0.91 kg
Package size155 × 58 × 23 mm

Questions about this item

Does the BP7235 generate noticeable heat or noise during a full 16-hour shift?

The NiMH pack runs silently and produces only mild warmth during extended use in the calibrator.

What must I already own for the BP7235 to function?

It is designed exclusively for the Fluke 700 or 740 Calibrator and will not operate in other devices.

Will the BP7235 work reliably inside an older 700 series calibrator I still use?

Yes, its six 1.2 V cells and custom ABS/PC case match the original specification for both 700 and 740 models.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.