We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Fluke multimode fibre test reference cord kit with SC/LC and LC/LC metal connectors

Fluke

Fluke MRC50EFCSCLCKITM fibre optic cable kit

SKU CH-31QG-Y63AP MPN MRC50EFCSCLCKITM

Multimode 50 µm reference cord kit with SC/LC and LC/LC metal connectors for network testing

  • Multimode 50 µm test reference cords for accurate loss measurements
  • SC/LC and LC/LC metal connectors included for versatile patching
  • Factory-terminated cords ensure repeatable insertion-loss results
  • Kit format provides both connector pairs in one package
  • Fluke Networks manufacture guarantees professional-grade reliability

Test reference cord kit for multimode fibre

The Fluke MRC50EFCSCLCKITM supplies pre-terminated cords for certifying 50 µm multimode links. Each assembly uses EF-rated connectors and metal-bodied ferrules to maintain geometry during repeated mating. Technicians use the kit to verify loss budgets on premises cabling before handover. It suits installers and auditors who need traceable reference measurements.

Low insertion loss and repeatable alignment

Precision-polished end-faces keep insertion loss within the tight limits required for Tier 1 certification. The metal ferrules resist wear so that successive tests stay consistent without re-polishing. Strain-relief boots protect the fibre-to-ferrule bond during handling. Stable thermal performance means readings do not drift during extended test sessions.

Replaces worn or mismatched patch cords

The kit upgrades from ad-hoc patch cords that introduce excess loss or modal distortion. It is worth the jump when certification reports fail due to reference-cord uncertainty or when connector damage makes existing cords unreliable. Buyers who only need single-mode references or who require angled-polish connectors should select a different kit.

Highlights

  • Multimode 50 µm test reference cords for accurate loss measurements
  • SC/LC and LC/LC metal connectors included for versatile patching
  • Factory-terminated cords ensure repeatable insertion-loss results
  • Kit format provides both connector pairs in one package
  • Fluke Networks manufacture guarantees professional-grade reliability

Specifications

BrandFluke
Shipping weight11.34 kg
Package size249 × 180 × 23 mm

Questions about this item

How do I connect the SC and LC connectors in the Fluke MRC50EFCSCLCKITM kit to my test equipment?

Align the keyed SC and LC ferrules with the corresponding ports on your tester or patch panel, push until the latch clicks, and verify the connection with a light source and power meter before running any certification tests.

What maintenance will the Fluke MRC50EFCSCLCKITM reference cords require over time?

Inspect the end faces before each use, clean with a lint-free wipe and isopropyl alcohol if contaminated, and replace any cord that shows scratches, chips, or insertion-loss readings outside the tester's pass threshold.

What is the first performance limit reached when the Fluke MRC50EFCSCLCKITM cords are used for extended certification sessions?

Repeated mating cycles can degrade the ceramic ferrules, causing insertion loss to rise above the reference-grade specification before any other parameter becomes an issue.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.