We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow handheld Fluke 789 process meter with large dual display and magnetic hanger

Fluke

Fluke 789 VIP Kit process meter

SKU CH-X0MY-TXD5T

Hand-held process calibrator with 24 V loop supply, 1000 V True-RMS multimeter, 1200 Ω mA drive, and 140-hour battery life

  • Value kit includes free case, magnetic hanger, and test leads
  • 24 V loop power supply powers transmitters without external source
  • Very large dual display shows multiple readings simultaneously
  • Enhanced backlight with two brightness settings adapts to any lighting
  • 1200 Ohm drive capability on mA source handles high-impedance loops

ProcessMeter VIP Kit

The Fluke 789 VIP Kit combines a digital multimeter and a loop calibrator in a single hand-held instrument. It includes a free case, magnetic hanger, and test lead set. The 24 V loop power supply supports transmitter testing. A very large dual display with enhanced backlight offers two brightness settings for varied lighting conditions.

Technicians needing combined measurement

This kit suits process technicians who require simultaneous voltage measurement and milliamp sourcing with 1200 Ohm drive capability. It is not suited for users who need a bench-top calibrator with higher current output or multi-channel logging. Buyers seeking integrated thermal imaging or wireless data streaming should consider other instrument classes.

24 V loop power with 250 Ohm HART resistor

The built-in 24 V loop supply includes a 250 Ohm resistor for HART communication, eliminating the need for an external resistor during configuration. The meter is rated to 1000 V CAT III 1010 and delivers 440 mA measurement capability with True-RMS accuracy. Externally accessible AA batteries provide 140 hours of typical measurement-mode operation.

Highlights

  • Value kit includes free case, magnetic hanger, and test leads
  • 24 V loop power supply powers transmitters without external source
  • Very large dual display shows multiple readings simultaneously
  • Enhanced backlight with two brightness settings adapts to any lighting
  • 1200 Ohm drive capability on mA source handles high-impedance loops

Specifications

BrandFluke

Questions about this item

How do I install the batteries in the Fluke 789 and what step is often missed?

Open the external battery door, insert four AA alkaline cells observing the polarity markings, then close the door securely so the seal remains intact for the 1000 V CAT III rating.

What maintenance will the 24 V loop power supply need over time?

The loop supply is solid-state and requires no periodic service; only the four AA batteries need replacement after roughly 140 hours of measurement use.

At what current does the mA source hit its compliance limit first during a long test?

The mA source can drive up to 1200 ohms, so the compliance voltage limit is reached before the 24 V loop supply or the 440 mA fuse rating becomes a factor.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.