Fluke
Fluke 725 Multifunction Process Calibrator measurement tool
Compact digital process calibrator measures and sources mA, volts, RTDs, thermocouples, frequency, ohms and pressure with optional modules, plus split-screen display and auto-stepping
- Analog/DigitalDigital
- TypeProcess Calibrator
- Compact design sources and measures multiple process parameters
- Split-screen display shows input and output values simultaneously
- Auto-stepping and auto-ramping enable remote testing with 25 % stepping
- Simple menu-free controls make operation easy and setup fast
- Rugged build handles mA, volts, RTDs, thermocouples, frequency, ohms and optional pressure modules
Compact Multifunction Calibrator
The Fluke 725 is a digital process calibrator built for field technicians who need to source and measure multiple parameters in one handheld instrument. It covers mA, volts, RTDs, thermocouples, frequency, ohms and pressure with optional modules. This replaces several single-function calibrators for process plant maintenance and valve testing.
Split-Screen Display and Simple Controls
A split screen shows input and output values simultaneously, with the upper display measuring volts, current and pressure while the lower display measures and sources the full range. Controls operate without menus, and memory functions speed up repeated setups. The rugged, lightweight housing is made for daily use in industrial environments.
Auto-Stepping and Sustained Field Operation
Auto-stepping and auto-ramping support remote testing, while 25 % stepping enables fast linearity checks without manual intervention. The instrument sources mA while measuring pressure for valve and I/P tests during extended sessions. Its design is intended to withstand continuous operation in harsh conditions rather than brief bench use.
Highlights
- Compact design sources and measures multiple process parameters
- Split-screen display shows input and output values simultaneously
- Auto-stepping and auto-ramping enable remote testing with 25 % stepping
- Simple menu-free controls make operation easy and setup fast
- Rugged build handles mA, volts, RTDs, thermocouples, frequency, ohms and optional pressure modules
Specifications
| Model | 725 |
|---|---|
| Analog/Digital | Digital |
| Type | Process Calibrator |
Questions about this item
How do I connect the optional pressure modules to the Fluke 725 for pressure calibration?
Attach the optional pressure module to the dedicated pressure port on the Fluke 725; the calibrator automatically detects the module range so you can source mA while measuring pressure without menu navigation.
Which consumable parts of the Fluke 725 will need periodic replacement?
The internal batteries and the test leads are the primary consumables; replace batteries when the low-battery indicator appears and inspect leads for damaged insulation or worn probes before each calibration session.
What is the first limitation that appears during extended auto-stepping or auto-ramping runs on the Fluke 725?
Battery depletion is the first limit during sustained auto-stepping or auto-ramping; the 25 % stepping function draws continuous current, so monitor the battery indicator and swap cells before the calibrator powers down mid-test.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
