FLEANE HDMI Splitter 1×3 with 4 ft Cable and Power Adapter

FLEANE 1×3 HDMI Splitter

This FLEANE splitter duplicates a single HDMI source across three displays at once so the same picture appears in multiple rooms. It ships with a 4 ft HDMI cable and a power adapter for immediate setup. The unit supports mirror mode only and cannot extend a desktop across separate monitors. Buyers who need independent content on each screen should look elsewhere.

Mirror-only behaviour under sustained load

The aluminium-alloy housing passes 10.2 Gbps bandwidth with no lag, flash or resolution drop during continuous use. Supported output formats include 4K x 2K at 30 Hz, 1080P at 30 Hz and 1080P at 60 Hz with 8, 10 or 12-bit deep colour. All connected displays must run the same resolution for stable operation. The splitter does not extract audio to a soundbar and does not support ARC or eARC.

Compatibility checklist before ordering

Verify that your source and displays work with HDMI 1.4, 1.3, 1.2, 1.1 or 1.0 and HDCP 1.4, as the device will not bypass HDCP. Maximum cable reach is 32 ft for 1080P signals and 16 ft for 4K signals on both input and output sides. The splitter cannot switch between three input devices and is not an audio extractor.