We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular transmitter and receiver units with HDMI ports and Ethernet jacks, plus IR cables and power adapters

FLEANE

FLEANE HDMI over Ethernet Extender EX-170C 4K 30Hz 164ft

SKU CH-0D8Y-KZC5R

Extends 4K HDMI signals up to 164 feet over CAT6 cable with IR control and a local loop-out port

  • TypeHDMI Adapter
  • Extends 4K video up to 164 feet over CAT6/7 cable
  • HDMI loop-out on transmitter enables local monitoring while extending
  • IR Tx/Rx cables included for remote source control
  • Supports 4K at 30Hz and 1080p at 60Hz resolutions
  • Dual-voltage power adapters with international converter provided

HDMI over Ethernet Extender EX-170C

The FLEANE EX-170C extends HDMI signals up to 164 feet using CAT5, CAT6 or CAT7 cable. It delivers 4K at 30Hz and 1080p at 60Hz for home or office installations. The kit includes transmitter, receiver, IR cables and two power adapters.

Loop-Out replaces splitters

A built-in HDMI Loop-Out on the transmitter feeds a local monitor while the signal travels to a remote display. This removes the need for a separate splitter when monitoring is required. The jump is worth it when cable runs exceed standard HDMI limits.

Fits CAT5, CAT6 or CAT7 runs

Connect the transmitter to the source and the receiver to the display with a single Ethernet cable. The dual-voltage power supplies work with US plugs and include an international adapter. IR pass-through lets you control the source from the remote location.

Highlights

  • Extends 4K video up to 164 feet over CAT6/7 cable
  • HDMI loop-out on transmitter enables local monitoring while extending
  • IR Tx/Rx cables included for remote source control
  • Supports 4K at 30Hz and 1080p at 60Hz resolutions
  • Dual-voltage power adapters with international converter provided

Specifications

TypeHDMI Adapter

Questions about this item

What cable length and category are required for the 164ft 4K 30Hz run?

Use a single CAT 6 or CAT 7 cable up to 50 meters (164ft) to carry 4K at 30Hz or 1080p at 60Hz between the transmitter and receiver.

Which power adapters must be connected before linking the HDMI source and display?

Plug the supplied 5V DC adapters into both the transmitter and receiver first, then connect the HDMI source to the transmitter and the display to the receiver.

Will the IR Tx and Rx cables supplied with the kit need replacement over time?

The IR emitter and receiver cables are passive and have no moving parts; they only need replacement if physically damaged.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.