We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
FLEANE HDMI extender sender and receiver units with IR cables and power adapters

FLEANE

FLEANE HDMI Extender 50m 1080P Cat5e Cat6 Cat6a Cat7 IR Remote audio adapter

SKU CH-5WZQ-MT4HG

Extends 1080p HDMI up to 165 ft over Cat5e–Cat7 with IR remote pass-through and 7.1-channel audio support

  • TypeHDMI Adapter
  • Extends 1080P video up to 165 ft over single Cat5e/Cat6/Cat6a/Cat7 cable
  • Built-in IR extender supports 20–60 kHz remote control through walls and cabinets
  • Carries Dolby Digital, TrueHD, DTS-HD and 7.1 LPCM audio formats
  • Includes TX sender, RX receiver, two 5 V/1 A adapters and IR extension cables
  • Works with 480i, 576i, 720p and 1080i signals for broad display compatibility

HDMI Extender Over Ethernet

The FLEANE HDMI Extender transmits 1080P video up to 50 metres over a single Cat5e, Cat6, Cat6a or Cat7 cable. It includes IR remote control support operating at 20 to 60 KHz. The kit contains a sender, a receiver, two DC5V power adapters, IR blaster and receiver cables, and a user manual. It suits installers needing long-distance HDMI distribution with remote control passthrough.

1080P Resolution and Audio Support

The extender handles 1080P, 1080i, 720p, 576p, 576i, 480p and 480i video resolutions at distances up to 150 feet. Audio formats supported include Dolby Digital, Dolby TrueHD, DTS, DTS-HD, Dolby-AC3, DSD and LPCM 7.1, though only PCM audio output is available. High-quality copper Cat6 or Cat6a cable is required for reliable operation at the maximum range.

Sender Receiver Kit Integration

The system uses one HDMI-to-RJ45 sender and one RJ45-to-HDMI receiver, each requiring its own DC5V power supply. IR extension cables allow remote control signals to pass between source and display locations. The adapter frees up direct HDMI cabling runs but does not support higher resolutions or advanced audio bitstreams beyond PCM output. Buyers needing 4K transmission or bitstream audio passthrough should consider alternative solutions.

Highlights

  • Extends 1080P video up to 165 ft over single Cat5e/Cat6/Cat6a/Cat7 cable
  • Built-in IR extender supports 20–60 kHz remote control through walls and cabinets
  • Carries Dolby Digital, TrueHD, DTS-HD and 7.1 LPCM audio formats
  • Includes TX sender, RX receiver, two 5 V/1 A adapters and IR extension cables
  • Works with 480i, 576i, 720p and 1080i signals for broad display compatibility

Specifications

TypeHDMI Adapter

Questions about this item

Will the 1080p signal reach my display 50 metres away over a single Cat6 cable?

Yes, the extender transmits 1080p up to 50 metres over Cat5e, Cat6, Cat6a or Cat7 using one Ethernet cable between the TX sender and RX receiver.

How can I verify the IR remote function works after connecting the TX and RX units?

Point the remote at the IR receiver cable on the RX side; the built-in IR extender operates at 20 to 60 kHz and will relay commands back to the source device.

Which cables and power supplies are included, and what must I provide separately?

The box contains the HDMI-to-RJ45 TX, RJ45-to-HDMI RX, two DC 5 V/1 A adapters, IR blaster cable, IR receiver cable and a manual; you must supply the Cat5e/Cat6/Cat6a/Cat7 Ethernet cable.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.