FLEANE
FLEANE CSI to HDMI Extension Module 15pin 60mm FPC Cable Pack of 2
Extends Raspberry Pi camera connections over standard HDMI cable up to 10 metres and adds three extra signals via a headphone jack
- TypeHDMI Adapter
- Extends Raspberry Pi camera reach over 10 metres using standard HDMI cable
- Connects directly to 15-pin CSI interface with included 60 mm FPC flex
- Compatible with Raspberry Pi Camera V1 V2 V3 and HQ modules
- Works across Raspberry Pi 4B 3B+ 3B 2 A B B+ and Zero boards
- Adds three auxiliary signal lines via headphone jack connector for extended functionality
CSI to HDMI Extension Module
This CSI to HDMI extension module converts the Raspberry Pi camera’s flat flex connection into a standard HDMI link. It supports Pi Camera V1, V2, V3 and HQ models and works with Raspberry Pi 4B, 3B+, 3B, 2, A/B/B+ and Zero boards. The pack contains two identical adapter sets.
Installation and common issues
Each module plugs into the camera’s 15‑pin FPC socket using the included 60 mm flex cable, then connects to a high‑quality HDMI cable. The board also routes three auxiliary signals through a headphone‑jack connector. A poor HDMI cable is the usual cause of signal loss or instability.
Maximum extension distance
With a high‑quality HDMI cable the camera signal can reach over 10 metres, far beyond the length of a standard FPC ribbon. This distance is the key specification that determines whether the module suits a given mounting location.
Highlights
- Extends Raspberry Pi camera reach over 10 metres using standard HDMI cable
- Connects directly to 15-pin CSI interface with included 60 mm FPC flex
- Compatible with Raspberry Pi Camera V1 V2 V3 and HQ modules
- Works across Raspberry Pi 4B 3B+ 3B 2 A B B+ and Zero boards
- Adds three auxiliary signal lines via headphone jack connector for extended functionality
Specifications
| Type | HDMI Adapter |
|---|
Questions about this item
How do I confirm the CSI to HDMI extension module is working after connecting my Raspberry Pi Camera V3?
The camera feed should appear on the Raspberry Pi without signal loss when using a high-quality HDMI cable up to 10 metres.
What comes in the pack and what extra items are needed to operate the module?
Two extension boards and two 15pin 60mm FPC cables are included; a high-quality HDMI cable and a compatible Raspberry Pi camera must be purchased separately.
Which module version should I choose for a Raspberry Pi Camera V2 or HQ on a Pi 4B?
The same module supports V1, V2, V3 and HQ cameras on all Raspberry Pi models including Pi 4B, so one version covers all listed setups.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
