We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass 0.6 mm nozzle for Adventurer 5M series, quick-release design

Flashforge

Flashforge Nozzle Assembly Adventurer 5M Series 0.6mm

SKU CH-D722-0VHJ1

A quick-release nozzle delivering 32 mm³/s flow, 50 W heating to 200 °C in 35 s and 280 °C maximum for carbon-fibre, glass-fibre and composite filaments at 0.6 mm diameter

Option 0.6mm

  • 32 mm³/s flow rate speeds up prints
  • 280 °C max temperature supports abrasive filaments
  • 35-second heat-up to 200 °C cuts wait time
  • Quick-release design swaps nozzles in 3 seconds
  • 6 mm bore optimised for carbon-fibre and glass-fibre materials

Purpose and Compatibility

This nozzle assembly is built for the Flashforge Adventurer 5M series and matches the specification shipped with the AD5M and AD5M Pro. The 0.6 mm bore targets makers who print abrasive materials such as carbon-fibre or glass-fibre filament and want higher throughput than a standard tip allows.

Build and Daily Use

A patented quick-release mechanism lets you swap the nozzle in roughly three seconds without tools. The heater reaches 200 °C in 35 seconds and delivers 50 W of power, while the hardened tip withstands temperatures up to 280 °C for printing PLA galaxy, ASA sparkle, wood-filled and other specialty filaments.

Upgrade Context

The 0.6 mm diameter supports layer heights of 0.2 mm or 0.3 mm and a volumetric flow of 32 mm³/s, stepping up from the 0.4 mm standard tip used for general-purpose printing. It is not suited for fine-detail models that need 0.1 mm layers or for printers outside the Adventurer 5M family.

Highlights

  • 32 mm³/s flow rate speeds up prints
  • 280 °C max temperature supports abrasive filaments
  • 35-second heat-up to 200 °C cuts wait time
  • Quick-release design swaps nozzles in 3 seconds
  • 6 mm bore optimised for carbon-fibre and glass-fibre materials

Specifications

No published specifications for this item yet.

Other versions of this model

3 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What flow rate does the 0.6 mm nozzle achieve with its 50 W heater?

The assembly delivers up to 32 mm³/s and reaches 200 °C in 35 seconds, so the 0.6 mm tip can sustain the rated flow for high-speed printing.

Which Adventurer 5M printers accept this quick-release nozzle?

It is designed for the AD5M and AD5M Pro and uses the same patented quick-change mechanism fitted to those machines.

How do you swap the nozzle in three seconds without tools?

Heat the hot end, press the release lever on the print head, pull the old nozzle straight out, push the new one in until it clicks, then run a quick calibration.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.