We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass nozzle with quick-release collar for Adventurer 5M series

Flashforge

Flashforge Nozzle Assembly Adventurer 5M Series 0.4mm 280C 3D Printer Accessory

SKU CH-ZNVC-CMQ39

Quick-release nozzle assembly for Adventurer 5M series prints up to 280 °C with 32 mm³/s flow and 35-second heat-up

Option 0.4mm

  • High-speed printing with 32 mm³/s flow rate
  • Heats to 200 °C in just 35 seconds
  • 50 W heating power reaches 280 °C for more filaments
  • Patented quick-release design swaps nozzles in 3 seconds
  • 4 mm standard nozzle matches 0.2 mm layer height

Target Printer and Role

This nozzle assembly fits the Flashforge Adventurer 5M series and matches the original part supplied with AD5M and AD5M Pro machines. It is intended for owners who need a direct replacement or a spare for routine maintenance.

Thermal and Flow Limits

The nozzle reaches 200C in 35 seconds with 50w heating power and a maximum temperature of 280C. A flow rate of 32mm³/s sets the practical throughput ceiling for any filament used with this assembly.

Swap Speed and Diameter Choice

The patented quick-release design allows a nozzle change in roughly three seconds without tools. Choose 0.25mm for 0.1mm layer precision, 0.4mm for 0.2mm standard layers, 0.6mm for 0.2 or 0.3mm efficient layers, or 0.8mm for 0.3 or 0.4mm maximum throughput; abrasive filaments such as carbon-fibre or glass-fibre require the harder 0.6mm or 0.8mm variants.

Highlights

  • High-speed printing with 32 mm³/s flow rate
  • Heats to 200 °C in just 35 seconds
  • 50 W heating power reaches 280 °C for more filaments
  • Patented quick-release design swaps nozzles in 3 seconds
  • 4 mm standard nozzle matches 0.2 mm layer height

Specifications

No published specifications for this item yet.

Other versions of this model

3 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Which nozzle diameter should I choose for the Adventurer 5M series?

The 0.4 mm nozzle is the standard choice with a 0.2 mm layer height. For high precision, the 0.25 mm nozzle supports 0.1 mm layers. The 0.6 mm and 0.8 mm nozzles are wear-resistant for abrasive filaments like carbon or glass fibre and allow 0.2–0.4 mm layers for faster prints.

What does the 32 mm³/s flow rate mean for my prints?

It indicates the maximum volume of filament the hot end can melt and push through per second, enabling high-speed printing on the Adventurer 5M series when paired with the 50 W heater that reaches 200 °C in 35 seconds.

How does the 280 °C maximum temperature affect filament compatibility?

It allows printing a wider range of materials including ASA, PLA variants with sparkle or multicolour effects, wood-filled PLA and fibre-reinforced filaments that require higher extrusion temperatures.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.