FlashForge DTUS Silk PLA Filament Dreamy Trio 1.75mm 1kg
1.75 mm silk PLA filament on a 1 kg spool with ±0.02 mm diameter tolerance for glossy, clog-free prints
- ColorDreamy Trio
- MaterialPolylactic Acid
- Diameter1.75
- Weight2.2 pounds
- Silky glossy finish elevates printed models
- Excellent flow and layer adhesion reduce print failures
- Clog-free and bubble-free after 24-hour drying and vacuum sealing
- Precise 1.75 mm diameter with ±0.02 mm tolerance across 99% of spool
- 1 kg spool compatible with 200–220 °C extruder and 25–60 °C bed temperatures
Silk PLA Filament for Decorative Prints
FlashForge DTUS Silk PLA Filament in Dreamy Trio colour delivers a smooth, glossy surface that suits artistic models, display pieces and educational demonstrations. The 1.75 mm diameter spool holds 1 kg of polylactic acid and is dried for 24 hours before vacuum sealing to ensure a clog-free, bubble-free experience.
Ready to Load with Tight Tolerance
Advanced CCD measurement keeps 99 % of the filament within a +/- 0.02 mm tolerance, so it feeds reliably through a standard 0.4 mm nozzle at 200–220 °C extruder temperature and 25–60 °C bed temperature. The material’s strong interlayer adhesion reduces layer-separation failures, while the silk additive flows cleanly without frequent nozzle purges.
Check Nozzle and Bed Compatibility First
Verify that your printer accepts 1.75 mm filament and can reach the recommended temperature range; a hardened or larger 0.6 mm nozzle is not required for this formulation. Ensure the build surface works with PLA at 25–60 °C and that the spool dimensions fit your holder, as the 2.2 lb weight may exceed compact printer mounts.
Highlights
- Silky glossy finish elevates printed models
- Excellent flow and layer adhesion reduce print failures
- Clog-free and bubble-free after 24-hour drying and vacuum sealing
- Precise 1.75 mm diameter with ±0.02 mm tolerance across 99% of spool
- 1 kg spool compatible with 200–220 °C extruder and 25–60 °C bed temperatures
Specifications
| Brand | FlashForge |
|---|---|
| Model | DTUS |
| Color | Dreamy Trio |
| Material | Polylactic Acid |
| Diameter | 1.75 |
| Weight | 2.2 pounds |
Questions about this item
How can I verify the 1.75mm diameter is within the +/- 0.02mm tolerance after loading the spool?
The supplier states that 99% of the filament measures 1.75mm with a tolerance of +/- 0.02mm using CCD diameter measurement and adaptive control systems.
What comes with the 1kg Dreamy Trio spool and what must I supply separately?
The box contains the 1kg (2.2 lbs) vacuum-sealed Silk PLA spool dried for 24 hours; you must provide a compatible 3D printer, a 0.4mm nozzle, and a build plate capable of 25-60°C.
Which extruder temperature range should I select for this Silk PLA variant?
Use 200-220°C extruder temperature as listed for Silk PLA in the manufacturer's specification table.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
