We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Purple rack mounting studs in a twenty pack with yellow lock washers

FireFold

FireFold Rackstuds Series II 20-Pack Purple 3.2mm

SKU CH-WXX9-48Q5D

Purple Series II rack-mount studs replace cage nuts in 19-inch square-punched rails, install from the front in under 30 seconds, and support over 400 pounds of shear force

  • Front insertion in under 30 seconds with lock washer and nut
  • Supports over 400 lb shearing force for heavy equipment
  • Fits 19" EIA-310 square punched rails 2.7–3.2 mm thick
  • Purple color code identifies 3.2 mm rail version in 20-pack
  • Re-designed Series II nut adds screwdriver slot and longer threads

Front-Mount Rack Studs

FireFold Rackstuds Series II replace traditional cage nuts in 19-inch racks with square-punched vertical rails. The 20-pack in purple suits technicians who want to mount IT, pro audio, security or telecom gear without reaching behind the cabinet.

Install From the Front

Each stud pushes through the rail hole from the front, a yellow lock washer drops on, and the nut spins down in under 30 seconds. The design supports the equipment while you fasten it, so single-handed mounting of heavy units becomes practical. If your rail thickness is 2.2 mm or less, the red version is recommended instead.

Rail Thickness Limits

These 3.2 mm studs fit rails between 2.7 mm and 3.2 mm thick, matching the EIA-310 hole size of 90.5 mm. They withstand shear forces above 400 pounds but are not intended for rails outside the stated thickness range.

Highlights

  • Front insertion in under 30 seconds with lock washer and nut
  • Supports over 400 lb shearing force for heavy equipment
  • Fits 19" EIA-310 square punched rails 2.7–3.2 mm thick
  • Purple color code identifies 3.2 mm rail version in 20-pack
  • Re-designed Series II nut adds screwdriver slot and longer threads

Specifications

BrandFireFold
ModelRSL3.2P20-S2

Questions about this item

How can I confirm the Rackstuds are holding securely after I spin on the lock nut?

The lock nut spins onto the longer Series II threads and seats against the yellow lock washer; once the nut is snug the stud withstands over 400 lb of shear force, so a firm hand-tight turn shows it is working.

What comes in the 20-pack and do I need any extra parts for a standard 19" rack?

The pack contains 20 purple Series II Rackstuds (model RSL3.2P20-S2), each with an integrated yellow lock washer and nut — nothing else is required for square-punched 19" rails between 2.7 mm and 3.2 mm thick.

Which colour version should I choose for rails that measure 3.2 mm thick?

The purple 3.2 mm version is made for rails from 2.7 mm up to 3.2 mm; if your rails are 2.2 mm or thinner, the red version is the correct one.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.