FireFold
FireFold Cat6 5 ft White network ethernet cable
A 5 ft Cat6 patch cable with 550 MHz bandwidth, 24 AWG bare copper conductors and gold-plated RJ45 connectors
- TypeNetwork Ethernet Cables
- Cat6
- Length5 ft.
- ColorWhite
- 550 MHz bandwidth supports fast data transfer
- 24 AWG bare copper conductors ensure reliable signal quality
- Gold-plated 50 µ" RJ45 pins resist corrosion for lasting connections
- Snagless boot protects the connector tab during installation
- UL listed and RoHS compliant for safety and environmental standards
Five-foot Cat6 patch cord
This five-foot Cat6 patch cord uses 24 AWG stranded bare-copper conductors and a CM-rated PVC jacket to carry 550 MHz signals. Unshielded RJ45 plugs with 50-micron gold pins follow the 568B wiring code and meet ANSI/TIA-568-C.2 Category 6 standards. It is built for standard Ethernet drops up to 100 metres in offices and homes.
Snagless boot and gold-plated contacts
A moulded snagless boot protects the latch during repeated insertions while the gold-plated pins resist oxidation for reliable contact. The 5.8 mm jacket meets UL and cUL listings plus RoHS compliance, so the cable can be routed through plenum-adjacent spaces without extra sleeving.
Simple push-in installation
Push each RJ45 connector into a keystone jack or NIC port until the latch clicks; the snagless boot prevents the tab from catching on adjacent cables. The only common issue is exceeding the 100-metre channel limit, which introduces errors the cable itself cannot correct.
Highlights
- 550 MHz bandwidth supports fast data transfer
- 24 AWG bare copper conductors ensure reliable signal quality
- Gold-plated 50 µ" RJ45 pins resist corrosion for lasting connections
- Snagless boot protects the connector tab during installation
- UL listed and RoHS compliant for safety and environmental standards
Specifications
| Type | Network Ethernet Cables |
|---|---|
| Cat | 6 |
| Length | 5 ft. |
| Color | White |
Questions about this item
Will the RJ45 connectors or the 5.8 mm jacket need replacement after repeated plugging?
The molded snagless boot protects the 8P8C gold-plated 50U" connectors and the 5.8 mm flame-retardant PVC jacket, so normal insertions do not require scheduled replacement.
What electrical limit appears first during continuous gigabit traffic?
The conductor resistance is capped at 9.38 Ω per 100 m and the cable is rated to 550 MHz, so attenuation at the rated frequency is the first constraint under sustained load.
Does the 24 AWG bare copper construction run hot or draw extra power on a 24/7 link?
As a passive UTP patch cord it carries only signal current, so it generates no measurable heat and adds no power draw beyond the connected devices.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



