We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular QSFP28 transceiver module with LC duplex ports and metallic finish

Finisar Corporation

Finisar Corporation FTLC9152RGPL QSFP28 SWDM4 103.1Gb/s 100m server accessory

SKU CH-MXSV-FP08W MPN FTLC9152RGPL

A hot-pluggable QSFP28 fiber module delivering 103.1 Gb/s over 100 m of OM4 duplex multimode fiber with digital diagnostics and less than 3.5 W power draw

  • TypeFiber Module
  • SpecificationsDistance: 100 m Data Rate (max): 103.1 Gb/s Protocol: 100G E
  • FeaturesHot-pluggable QSFP28 form factor Supports 103.1Gb/s aggregat
  • Hot-pluggable QSFP28 form factor enables quick module swaps
  • 1 Gb/s aggregate bit rate supports 100G Ethernet links
  • Power dissipation below 3.5W reduces thermal load
  • Operates reliably from 0°C to 70°C case temperature
  • Reaches 75m on OM3, 100m on OM4, 150m on OM5 duplex multimode fibre

103.1 Gb/s QSFP28 SWDM4 Module

The Finisar FTLC9152RGPL is a hot-pluggable QSFP28 transceiver designed for 100G Ethernet links. It delivers an aggregate data rate of 103.1 Gb/s over duplex multimode fibre using LC connectors. The module operates on a single 3.3 V supply with power dissipation below 3.5 W. Digital diagnostics and a commercial temperature range of 0 to 70 °C support standard data-centre deployments.

Suited For Short-Reach 100G Links

Network engineers building 100G Ethernet connections up to 100 metres on OM4 or 150 metres on OM5 duplex multimode fibre will find this module matches their reach and bandwidth needs. The 850 nm SWDM VCSEL transmitter and PIN receiver provide four 25 Gb/s lanes over a single duplex pair. Buyers needing longer distances, single-mode fibre, or higher lane speeds should look at alternative form factors.

Reach Decided By Fibre Grade

The single specification that determines whether this part fits a link is the maximum supported distance on the installed fibre grade. It reaches 75 metres on OM3, 100 metres on OM4 and 150 metres on OM5 duplex multimode fibre. Verify the cable type and length in your rack before selecting this transceiver.

Highlights

  • Hot-pluggable QSFP28 form factor enables quick module swaps
  • 1 Gb/s aggregate bit rate supports 100G Ethernet links
  • Power dissipation below 3.5W reduces thermal load
  • Operates reliably from 0°C to 70°C case temperature
  • Reaches 75m on OM3, 100m on OM4, 150m on OM5 duplex multimode fibre

Specifications

BrandFinisar
ModelFTLC9152RGPL
TypeFiber Module
SpecificationsDistance: 100 m
Data Rate (max): 103.1 Gb/s
Protocol: 100G Ethernet Compliant
Low End Case Temperature (degree C): 0
High End Case Temperature (degree C): 70
Diagnostics: Digital
Transmitter: 4x SWDM VCSEL
Receiver: PIN
Voltage Supply: 3.3
Connector: LC
Wavelength: 850nm Band
FeaturesHot-pluggable QSFP28 form factor
Supports 103.1Gb/s aggregate bit rate
Power dissipation <3.5W
RoHS-6 compliant
Commercial case temperature range of 0 degree C to 70 degree C
Single 3.3V power supply
Maximum link length of 75m/100m/150m on OM3/OM4/OM5 Duplex Multimode Fiber (MMF)
4x25Gb/s 850nm VCSEL-based transmitter
4x25G CAUI-4 electrical interface
Duplex LC receptacles
I2C management interface
Shipping weight0.16 kg
Package size279 × 203 × 20 mm

Questions about this item

Will the FTLC9152RGPL work in an older switch that only has QSFP+ ports?

No, the module uses the QSFP28 form factor and a 4x25G CAUI-4 electrical interface, which are not compatible with QSFP+ ports that run at 4x10G.

How can I confirm the module is operating correctly after installation?

The module supports digital diagnostics over the I2C management interface, allowing you to monitor temperature, voltage, and optical power levels in real time.

Does the FTLC9152RGPL ship with the duplex LC patch cables needed for OM4 fibre?

The module includes duplex LC receptacles only; you must purchase OM3, OM4, or OM5 duplex multimode fibre patch cables separately to achieve the 100m reach.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.