We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

FILSHU C14 to C13 Power Extension Cord with Switch 42CM

SKU CH-XRA5-YZVVG

IEC 320 C14 male to C13 female 42 cm extension cord with inline on-off switch and indicator lamp

  • FeaturesThis power extension cord is made by FILSHU and features a s
  • Inline switch lets you power devices without unplugging
  • 10 A 125 V rating matches standard C13/C14 equipment
  • 14 AWG SJTW cable handles continuous heavy-duty loads
  • Red LED indicator shows power state at a glance
  • 42 cm length keeps racks tidy and clutter-free

IEC C14 to C13 Extension with Inline Switch

This 42 cm power extension cord connects a C14 inlet to a C13 outlet and includes an illuminated on-off rocker switch. It lets you cut power to a device without repeatedly plugging or unplugging the connector. The assembly is UL listed and built with SJTW 14 AWG conductors rated for 10 A at 125 V. It suits desktop PCs, monitors, UPS units or PDUs that use standard IEC 320 connections.

Switch Behaviour Under Continuous Load

The integrated DPST rocker switch carries its own 20 A 125 V AC rating with a red LED indicator. Because the switch rating exceeds the 10 A cable rating, the cord itself remains the limiting factor during sustained operation. The heavy-duty 14 AWG construction handles continuous 10 A current without overheating, while the switch provides reliable make-break cycles for daily on-off control of connected equipment.

Verify Your Inlet and Outlet Types

Before ordering, confirm that your power source presents a C14 male inlet and your device accepts a C13 female connector. The cord adds 42 cm of reach, so ensure that length bridges the gap without tension. Check that the total load on the circuit stays within 10 A at 125 V and that the switch location remains accessible for safe operation.

Highlights

  • Inline switch lets you power devices without unplugging
  • 10 A 125 V rating matches standard C13/C14 equipment
  • 14 AWG SJTW cable handles continuous heavy-duty loads
  • Red LED indicator shows power state at a glance
  • 42 cm length keeps racks tidy and clutter-free

Specifications

BrandFILSHU
Model778957664926
FeaturesThis power extension cord is made by FILSHU and features a style with pvc material. It supports a voltage of 125 volts and an input current of 10 amps. The cable is C13 TO C14 in color and is UL listed. It comes with a Male-to-Female connector and does not require batteries.

Questions about this item

Does the inline DPST rocker switch rated 20A 125V generate noticeable heat during continuous all-day operation?

The switch is rated 20A 125V AC and the cord carries a maximum of 10A, so normal continuous use stays well within its thermal limits.

What existing power connection must my equipment already provide for this 42CM C14-to-C13 cord to work?

Your device or UPS needs a standard IEC 320 C14 inlet; the cord’s C13 female end then plugs into that inlet.

Will the 14AWG SJTW cable and C13 connector mate reliably with older IEC 320 C14 inlets on legacy servers or PDUs?

Yes, the C13 female and C14 male follow the IEC 320 standard, so they fit older 3-pole inlets without adaptation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.