We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

FILSHU 3P+205RED 6ft 18AWG Power Cord with Inline Switch

SKU CH-1NA2-E654W

A 6 ft 18 AWG power cord with a NEMA 5-15 plug, bare-wire termination and a waterproof inline switch with red indicator rated for 10 A at 125 V

  • Length6 Feet
  • Connector DetailMale-to-Female
  • SpecificationsVoltage: 125 volts; Current: 10 amps; Connector: Male-to-Fem
  • Inline switch with red LED lets you cut power at the cord
  • 6 ft length reaches outlets without stretching or strain
  • 18 AWG cable rated for 10 A at 125 V handles common appliances
  • Waterproof switch rated for outdoor use in damp conditions
  • Bare-wire end allows custom termination for DIY projects

Power cord with inline switch and red indicator

The FILSHU 3P+205RED is a 6-foot 18 AWG power cord featuring a NEMA 5-15 three-prong plug on one end and bare wires on the other. An inline waterproof switch with a red LED sits 50 cm from the plug, allowing manual on and off control for connected equipment. It is rated for 125 volts and 10 amps and carries a UL listing.

Check your device wiring and installation needs

Verify that the equipment you intend to power accepts a bare-wire termination and operates within the 10-amp, 125-volt rating. Confirm that the 18 AWG gauge is adequate for the load and cable run. Ensure the mounting location can accommodate the switch positioned 50 cm from the plug and that the red indicator light is visible for status checks.

Suits DIY builds and appliance repairs needing

This cord fits hobbyists, technicians and installers who need a UL-listed pigtail with an integrated waterproof switch for custom wiring projects, power tools or appliance leads. It is not for buyers who require a ready-made IEC or NEMA 5-15 receptacle on the device end, nor for installations demanding a higher current rating or a longer cable run.

Highlights

  • Inline switch with red LED lets you cut power at the cord
  • 6 ft length reaches outlets without stretching or strain
  • 18 AWG cable rated for 10 A at 125 V handles common appliances
  • Waterproof switch rated for outdoor use in damp conditions
  • Bare-wire end allows custom termination for DIY projects

Specifications

BrandFILSHU
Model3P+205RED
Length6 Feet
Connector DetailMale-to-Female
SpecificationsVoltage: 125 volts; Current: 10 amps; Connector: Male-to-Female; UL Listed: true

Questions about this item

What comes in the box and do I need any extra connectors?

The cord has a 3-prong NEMA 5-15 plug on one end and bare wires on the other; you must supply your own terminals or connectors for the device side.

Which wire gauge and current rating should I pick for a 10 A tool?

This model is 18 AWG and rated 10 A at 125 V, matching the requirement exactly.

How does the 10 A / 125 V rating work with the inline switch on a real machine?

The waterproof switch is rated for the full 10 A load and includes a red LED that lights when the circuit is on.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.