We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow XT60 female plug to black DC 5.5x2.5mm jack adapter cable

Fervit

Fervit XT60 to DC 5.5x2.5mm Power Adapter

SKU CH-8K5J-TPGH3

XT60 to 5.5×2.5 mm DC adapter powers a TS100 soldering iron or FPV gear from a LiPo battery

  • Powers TS100 soldering iron from XT60 battery packs for field repairs
  • Connects FPV drones and RC gear via XT60 to DC 5.5x2.5mm plug
  • High-temperature resistant materials handle demanding multicopter and aeromodelling use
  • Plug-and-play design enables quick swaps between batteries and devices
  • Compatible with solar cells, vehicles and remote-control toys for versatile power access

Field Power Adapter for TS100 Soldering Iron

This Fervit adapter bridges an XT60 battery connector to a DC 5.5x2.5mm input. It is designed primarily for powering a TS100 soldering iron from a LiPo pack during field repairs. FPV pilots and multicopter builders will find it useful for quick soldering tasks at the flying field. The plug-and-play design requires no configuration or tools.

Passive Connector with High Temperature Resistance

The unit contains no active electronics, so it draws no power of its own and produces no noise. Heat management depends entirely on the battery and the connected device. The supplier notes high temperature resistance and good insulation materials for safe operation under load. Current handling is limited by the XT60 and DC barrel specifications.

XT60 Female to DC Female Gender Changer

Both ends are female sockets, so a male XT60 lead from the battery and a male DC plug from the iron are required. The compact form factor adds minimal bulk to a field kit. It suits any 5.5x2.5mm DC device within the voltage range of the chosen battery pack. Users needing a different barrel size or a male XT60 output will need a separate adapter.

Highlights

  • Powers TS100 soldering iron from XT60 battery packs for field repairs
  • Connects FPV drones and RC gear via XT60 to DC 5.5x2.5mm plug
  • High-temperature resistant materials handle demanding multicopter and aeromodelling use
  • Plug-and-play design enables quick swaps between batteries and devices
  • Compatible with solar cells, vehicles and remote-control toys for versatile power access

Specifications

BrandFervit

Questions about this item

How do I connect the XT60 side to a LiPo battery without reversing polarity?

Match the XT60 female housing to the battery's XT60 male plug; the keyed shape only fits one way, so push straight in until the latch clicks — forcing it backwards bends the pins.

What part of the adapter wears out first with frequent field use?

The XT60 gold-plated contacts and the DC 5.5x2.5 mm barrel socket see the most insertions; inspect both for pitting or looseness after heavy sessions and replace the adapter if the barrel feels wobbly.

At what current does the XT60 connector become the limiting factor during long soldering jobs?

The XT60 interface is rated for 60 A continuous, so the adapter itself will not bottleneck a TS100 iron; the practical limit is the battery's discharge capability and the DC barrel's 5 A typical rating.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.