We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow XT60 male plug to black DC 7.9x5.4mm male jack adapter cable

Fervit

Fervit XT60 Male to DC 7.9x5.4mm Male Power Adapter

SKU CH-03X5-PPBT1

Connects a TS100 soldering iron to an XT60 battery for field repairs, also works with FPV gear, drones and RC toys

  • Powers TS100 soldering iron directly from XT60 battery packs
  • DC 7.9x5.4mm plug fits compatible devices without extra cables
  • High-temperature resistant materials withstand demanding field repairs
  • Plug-and-play design enables quick setup for FPV drones and RC vehicles
  • Insulated XT60 connector ensures safe power delivery for solar and mobile applications

XT60 to DC 7.9×5.4 mm adapter

This Fervit adapter converts an XT60 male connector to a DC 7.9×5.4 mm male plug. It is designed for FPV pilots and field technicians who need to power a TS100 soldering iron or similar DC device directly from a LiPo battery pack. The moulded housing uses high-temperature resistant insulation for safe operation in demanding outdoor environments.

Passive cable with high-temp insulation

No active electronics or cooling are present, so the adapter adds negligible thermal load and produces no audible noise. Power draw is determined entirely by the connected device and the source battery. The robust plug-and-play construction maintains reliable contact without requiring tools or configuration.

Sustained current limited by connectors

Under continuous load the XT60 and DC 7.9×5.4 mm interfaces set the practical current ceiling, so extended soldering sessions remain stable as long as the battery and iron stay within those connector ratings. Voltage drop across the short cable is minimal, preserving iron temperature during prolonged field repairs.

Highlights

  • Powers TS100 soldering iron directly from XT60 battery packs
  • DC 7.9x5.4mm plug fits compatible devices without extra cables
  • High-temperature resistant materials withstand demanding field repairs
  • Plug-and-play design enables quick setup for FPV drones and RC vehicles
  • Insulated XT60 connector ensures safe power delivery for solar and mobile applications

Specifications

BrandFervit

Questions about this item

How do I connect the XT60 male to the DC 7.9x5.4mm male plug without reversing polarity?

Align the keyed XT60 housing so the positive and negative pins match the battery output, then push the DC barrel straight into the TS100 soldering iron jack until it seats fully — the asymmetric shape prevents a backwards fit.

Will the connector insulation or pins degrade after repeated field use with LiPo packs?

The adapter uses high-temperature-resistant insulation rated for 60 A continuous; inspect the gold-plated contacts for pitting after heavy cycles and replace the unit if the barrel feels loose or shows discoloration.

At what current does the adapter become the bottleneck during a long soldering session?

The XT60 interface is rated for 100 A, but the DC 7.9x5.4mm barrel limits sustained draw to roughly 60 A, so that connector reaches its thermal limit first under continuous load.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.