We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow XT60 female connector joined to a silver DC 7.4x5.0mm male plug by short black cable

Fervit

Fervit XT60 Female to DC 7.4x5.0mm Male Power Adapter

SKU CH-KDXF-47HKA

Connects a TS100 soldering iron or FPV gear to an XT60 battery via a 7.4×5.0 mm DC plug

  • Connect TS100 soldering iron directly to XT60 battery packs
  • Power FPV drones, RC vehicles and solar projects with one adapter
  • High-temperature resistant materials maintain safe operation under load
  • Plug-and-play design requires no tools or soldering for field repairs
  • XT60 female to DC 7.4×5.0 mm male converts power instantly

FPV Field Repair Adapter

The Fervit XT60 Female to DC 7.4x5.0mm Male Power Adapter lets FPV pilots and hobbyists power a TS100 soldering iron directly from a flight battery with an XT60 output. It is built for field repairs on multirotors, quadcopters and other remote-controlled models. The plug-and-play design requires no soldering or configuration.

Capacity and Headroom

The adapter carries the XT60 rating of 60 amps and supports the SC100 fast-charge protocol up to 100 watts, so it comfortably handles the TS100 iron and similar DC loads. It runs out of headroom if the connected device draws more than the connector or protocol limits allow. No internal regulation or voltage conversion is provided.

Build and Daily Use

High-temperature resistant materials and solid insulation protect the joints during repeated heating cycles. The XT60 female end locks securely to a battery lead while the 7.4 mm by 5.0 mm DC male plug seats firmly in the iron jack. The compact cable assembly survives transport in a field box and connects in seconds.

Highlights

  • Connect TS100 soldering iron directly to XT60 battery packs
  • Power FPV drones, RC vehicles and solar projects with one adapter
  • High-temperature resistant materials maintain safe operation under load
  • Plug-and-play design requires no tools or soldering for field repairs
  • XT60 female to DC 7.4×5.0 mm male converts power instantly

Specifications

BrandFervit

Questions about this item

Will the XT60 female side accept the same 60 A rated battery leads I already use on my quadcopter?

Yes, the XT60 connector is the standard 60 A interface used on most FPV packs, so your existing leads will plug straight in.

How can I confirm the TS100 soldering iron is receiving power through the DC 7.4x5.0 mm plug?

The TS100 display will light up and show the input voltage once the adapter is seated firmly in the iron’s DC jack.

Does the package include a battery or a TS100 iron, or just the adapter itself?

Only the XT60 female to DC 7.4x5.0 mm male adapter is supplied; battery and soldering iron are sold separately.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.