We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact USB-C to DC 3.5×1.3 mm adapter with alloy shell and LED wattage display

Fervit

Fervit USB-C to DC 3.5×1.3 mm 100 W adapter with wattage display

SKU CH-580J-2WNXY

Converts a USB-C PD charger into a 3.5×1.3 mm DC plug delivering up to 100 W at 20 V 5 A with a live voltage, current and wattage display

  • Real-time power monitoring with LED voltage, current and wattage display
  • Up to 100 W Power Delivery via USB-C PD and QC 2.0/3.0 trigger
  • Plug-and-play adapter converts USB-C input to 3.5×1.3 mm DC output
  • Alloy housing protects the connector for durable daily use
  • Works with most USB-C chargers and DC laptops — verify jack size first

Fervit USB-C to DC 3.5×1.3 mm 100 W adapter

This adapter converts a USB-C Power Delivery source into a 3.5 mm by 1.3 mm barrel jack for laptops and other DC devices. It includes an LED display that shows voltage, current and power in real time. The alloy shell protects the connector during transport and daily use. It is aimed at users who want to power a barrel-jack laptop from a modern USB-C charger.

Upgrading from a fixed barrel-jack charger

The adapter replaces a proprietary laptop brick with any USB-C charger that can deliver 20 V at 5 A for the full 100 W, or 65 W at 18.5 V to 20.5 V for lower-power models. The jump is worth it when you want one charger for multiple devices and need visible confirmation of the negotiated power level. If your charger or cable is rated below 100 W, the adapter will only deliver the lower negotiated power.

Plug-and-play installation with one critical check

Installation is fully plug and play: connect the USB-C male end to the charger and the DC male barrel to the laptop. The only common issue is using a charger or cable that cannot support 100 W, which limits output to the lower negotiated voltage and current. Always verify that your laptop uses a 3.5 mm by 1.3 mm jack before purchase.

Highlights

  • Real-time power monitoring with LED voltage, current and wattage display
  • Up to 100 W Power Delivery via USB-C PD and QC 2.0/3.0 trigger
  • Plug-and-play adapter converts USB-C input to 3.5×1.3 mm DC output
  • Alloy housing protects the connector for durable daily use
  • Works with most USB-C chargers and DC laptops — verify jack size first

Specifications

BrandFervit

Questions about this item

What barrel jack size does the DC output plug use?

The adapter outputs through a DC male barrel jack measuring 3.5 mm outer diameter by 1.3 mm inner diameter.

How do I get the full 100 W output from the Type-C input?

Connect a USB-C charger and cable both rated for 100 W or higher; the built-in PD trigger then negotiates 20 V at 5 A.

Does the LED display need separate power or calibration over time?

No, the display is powered directly from the charging circuit and shows voltage, current and wattage in real time without calibration.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.